Hi,
i have 2 pppoe adsl link, i set on ppp.linkup:
pppoe1:
!bg route add default -mpath HISADDR
pppoe2:
!bg route add default -mpath HISADDR
from netstat -nr:
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 125.163.176.1 UGSP 0 20377 - 8 tun1
default 118.96.138.1 UGSP 0 0 - 8 tun2
but only default #1 always used
also when i dial there's message
# ppp -ddial -unit1 pppoe1
Working in ddial mode
Warning: iface rm: ioctl(SIOCDIFADDR_IN6,
fe80:7::20a:5eff:fe77:7c82/64): Can't assign requested address
Using interface: tun1
# ppp -ddial -unit2 pppoe2
Working in ddial mode
Warning: iface rm: ioctl(SIOCDIFADDR_IN6,
fe80:8::20a:5eff:fe77:7c82/64): Can't assign requested address
Using interface: tun2
i believe it's something with ipv6, but i already disable ipv6 in ppp.conf :
default:
set log Phase Chat LCP IPCP CCP tun command
set redial 15 0
set reconnect 15 10000
disable acfcomp protocomp
deny acfcomp
disable ipv6cp
set mtu max 1492
set mru max 1492
set speed sync
enable lqr
set lqrperiod 5
enable echo
set echoperiod 5
enable mssfixup
pppoe1:
set device "!/usr/sbin/pppoe -i vlan68"
set authname "xxxxx"
set authkey "xxxxx"
pppoe2:
set device "!/usr/sbin/pppoe -i xl2"
set authname "xxxxx"
set authkey "xxxxx"
no problem for 4.5-stable but after upgrade to 4.6-stable the problem
appears. i use cvsup for upgrading
OpenBSD 4.6-stable (GENERIC) #0: Sun Nov 29 12:10:27 WIT 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 1055678464 (1006MB)
avail mem = 1011879936 (965MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/07/05, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.3 @ 0xfbf10 (76 entries)
bios0: vendor Intel Corp. version "BF86510A.86A.0075.P24.0503071605"
date 03/07/2005
bios0: Intel Corporation D865GBF
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC TCPA WDDT
acpi0: wakeup devices TANA(S4) P0P3(S4) AC97(S4) USB0(S4) USB1(S4)
USB2(S4) USB3(S4) USB7(S4) UAR1(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus -1 (P0P2)
acpiprt3 at acpi0: bus 1 (P0P3)
acpicpu0 at acpi0
acpipwrres0 at acpi0: URP1
acpipwrres1 at acpi0: FDDP
acpipwrres2 at acpi0: LPTP
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xa000! 0xca000/0x800 0xca800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf0000000, size 0x8000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
xl0 at pci1 dev 1 function 0 "3Com 3c905C 100Base-TX" rev 0x78: apic 1
int 22 (irq 5), address 00:0a:5e:77:7c:82
exphy0 at xl0 phy 24: 3Com internal media interface
xl1 at pci1 dev 2 function 0 "3Com 3c905B 100Base-TX" rev 0x30: apic 1
int 17 (irq 9), address 00:10:5a:c5:8a:9e
exphy1 at xl1 phy 24: 3Com internal media interface
xl2 at pci1 dev 3 function 0 "3Com 3c905 100Base-TX" rev 0x00: apic 1
int 19 (irq 3), address 00:60:97:71:2e:94
nsphy0 at xl2 phy 24: DP83840 10/100 PHY, rev. 1
xl3 at pci1 dev 4 function 0 "3Com 3c905B 100Base-TX" rev 0x24: apic 1
int 18 (irq 10), address 00:10:5a:e1:03:93
exphy2 at xl3 phy 24: 3Com internal media interface
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38163MB, 78159151 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 18 (irq 10) for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02:
apic 1 int 17 (irq 9)
iic0 at ichiic0
adt0 at iic0 addr 0x2e: lm85 rev 0x62
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC3200CL3.0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
rgds,
-A3
