On Fri, Dec 04, 2009 at 08:41:12AM +0100, TomC!E! BodE>C!r wrote: > Hi all, > > someone have similar problem? When I try : > > $ sudo setxkbmap cz > $ > > then my network connection stop responding and I must run : > > $ sudo sh /etc/netstart > > In Xorg.log there is same error as here > https://bugs.freedesktop.org/show_bug.cgi?id=21761 > > Before this error I can see line with : > > mtrr set failed: Invalid argument > > OpenBSD 4.6-current (GENERIC.MP) #325: Sat Nov 28 18:58:05 MST 2009 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz ("GenuineIntel" > 686-class) 2.40 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR > real mem = 3707650048 (3535MB) > avail mem = 3608199168 (3441MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 09/17/09, BIOS32 rev. 0 @ > 0xffa10, SMBIOS rev. 2.4 @ 0xf6510 (57 entries) > bios0: vendor Dell Inc. version "A17" date 09/17/2009 > bios0: Dell Inc. Latitude E6400 > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG TCPA SLIC SSDT > acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S3) USB2(S3) USB3(S3) > USB4(S3) USB5(S3) USB6(S3) EHC2(S3) EHCI(S3) AZAL(S3) RP01(S4) > RP02(S4) RP03(S4) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 265MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz ("GenuineIntel" > 686-class) 2.40 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 2 > acpiprt0 at acpi0: bus 3 (PCIE) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 11 (RP01) > acpiprt3 at acpi0: bus 12 (RP02) > acpiprt4 at acpi0: bus 13 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus 0 (PCI0) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpitz0 at acpi0: critical temperature 107 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: PBTN > acpibtn2 at acpi0: SBTN > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "DELL MP4948B" serial 36706 type LION > oem "Samsung SDI" > acpibat1 at acpi0: BAT1 not present > acpivideo0 at acpi0: VID_ > acpivout0 at acpivideo0: CRT_ > acpivout1 at acpivideo0: LCD_ > acpivout2 at acpivideo0: DVI_ > acpivout3 at acpivideo0: DVI2 > acpivout4 at acpivideo0: DP__ > acpivout5 at acpivideo0: DP2_ > acpivideo1 at acpi0: VID_ > acpivout6 at acpivideo1: CRT_ > acpivout7 at acpivideo1: LCD_ > acpivout8 at acpivideo1: DP__ > acpivout9 at acpivideo1: DP2_ > acpivout10 at acpivideo1: DVI_ > acpivout11 at acpivideo1: DVI2 > acpivideo2 at acpi0: VID2 > bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800 > cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > inteldrm0 at vga1: apic 2 int 16 (irq 11) > drm0 at inteldrm0 > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 2 > int 22 (irq 10), address xx:xx:xx:xx:xx:xx > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 > int 20 (irq 3) > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 > int 21 (irq 11) > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 > int 22 (irq 10) > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 > int 22 (irq 10) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: > apic 2 int 21 (irq 11) > azalia0: codecs: IDT 92HD71B7, Intel/0x2802, using IDT 92HD71B7 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 > int 16 (irq 0) > pci1 at ppb0 bus 11 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 > int 17 (irq 0) > pci2 at ppb1 bus 12 > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 2 > int 17 (irq 3), MIMO 1T2R, MoW, address xx:xx:xx:xx:xx:xx > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 > int 18 (irq 0) > pci3 at ppb2 bus 13 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 > int 20 (irq 3) > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 > int 21 (irq 11) > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 > int 22 (irq 10) > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 > int 20 (irq 3) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci4 at ppb3 bus 3 > cbb0 at pci4 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 > int 19 (irq 10) > "Ricoh 5C832 Firewire" rev 0x04 at pci4 dev 1 function 1 not configured > sdhc0 at pci4 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 > int 18 (irq 11) > sdmmc0 at sdhc0 > "Ricoh 5C843 MMC" rev 0x11 at pci4 dev 1 function 3 not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 19 (irq 10) for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <Hitachi HTS723280L9A362> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-U633A, D200> ATAPI > 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic > 2 int 17 (irq 3) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM > spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM > pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x03: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 19 (irq 10) for native-PCI interrupt > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > uvideo0 at uhub0 port 6 configuration 1 interface 0 > "CN0TX5937248792101KJ Laptop_Integrated_Webcam_0.3M" rev 2.00/88.06 > addr 2 > uvideo0: video control not supported for this device. > video0 at uvideo0 > uhub8 at uhub2 port 1 "Broadcom BCM2046B1" rev 2.00/1.00 addr 2 > ugen0 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2 > uhidev0 at uhub8 port 1 configuration 1 interface 0 "Dell product > 0x8157" rev 2.00/1.00 addr 3 > uhidev0: iclass 3/1, 1 report id > ukbd0 at uhidev0 reportid 1: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub8 port 2 configuration 1 interface 0 "Dell product > 0x8158" rev 2.00/1.00 addr 4 > uhidev1: iclass 3/1, 125 report ids > ums0 at uhidev1 reportid 2: 3 buttons > wsmouse1 at ums0 mux 0 > uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > wskbd1: disconnecting from wsdisplay0 > wskbd1 detached > ukbd0 detached > uhidev0 detached > wsmouse1 detached > ums0 detached > uhid0 detached > uhidev1 detached > uhub8 detached > > > -- > http://www.openbsd.org/lyrics.html >
why are you running setxkbmap with sudo ? -- DISCLAIMER: http://goldmark.org/jeff/stupid-disclaimers/ This message will self-destruct in 3 seconds.
