I'm having some issues with a machine I'm using to run dansguardian as a
Web Content filter and proxy for my home.
Everything seems to work fine, except the USB doesn't seem to function.
It seems to be recognized in the dmesg (attached below), but when I plug
something into a USB port, there isn't any message displayed indicating
that I've plugged it in.
This happens with both a flash drive and a UPS that I'd like to use with
the machine.
Is the USB hardware on this chipset just not supported by OpenBSD?
Here is the dmesg:
OpenBSD 4.6 (GENERIC) #58: Thu Jul 9 21:24:42 MDT 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3200+ ("AuthenticAMD" 686-class, 512KB
L2 cache) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 1005088768 (958MB)
avail mem = 962936832 (918MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/22/05, BIOS32 rev. 0 @ 0xfb180,
SMBIOS rev. 2.4 @ 0xf0000 (50 entries)
bios0: vendor Phoenix Technologies, LTD version "1.09" date 11/22/2005
bios0: Hewlett-Packard HP dx5150 SFF(ER759UC)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT SRAT MCFG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) AUDO(S3) P2P_(S5)
MAC_(S3) UAR1(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus 1 (AGP_)
acpicpu0 at acpi0: PSS
acpitz0 at acpi0: critical temperature 82 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800
cpu0: Cool'n'Quiet K8 1995 MHz: speeds: 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "ATI", unknown product 0x5854 (class display subclass
miscellaneous, rev 0x00) at pci1 dev 5 function 1 not configured
ppb1 at pci0 dev 5 function 0 "ATI RS480 PCIE" rev 0x00
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, BCM5750 C0
(0x4200): apic 2 int 17 (irq 11), address 00:13:d3:fb:2e:40
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
pciide0 at pci0 dev 18 function 0 "ATI SB400 SATA" rev 0x00: DMA
pciide0: using apic 2 int 23 (irq 5) for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <WDC WD400BD-60LRA0>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
ohci0 at pci0 dev 19 function 0 "ATI SB400 USB" rev 0x00: apic 2 int 18
(irq 3), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB400 USB" rev 0x00: apic 2 int 18
(irq 3), version 1.0, legacy support
ehci0 at pci0 dev 19 function 2 "ATI SB400 USB2" rev 0x00: apic 2 int 18
(irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SB400 SMBus" rev 0x11: SMI
iic0 at piixpm0
iic0: addr 0x2f 00=82 01=0f 02=00 03=00 04=07 05=20 06=18 07=00 08=00
14=14 15=62 16=02 17=05 words 00=82ff 01=0fff 02=00ff 03=00ff 04=07ff
05=20ff 06=18ff 07=00ff
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem2 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem3 at iic0 addr 0x53: 256MB DDR SDRAM non-parity PC3200CL3.0
pciide1 at pci0 dev 20 function 1 "ATI SB400 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8164B, 0B07> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 3
pcib0 at pci0 dev 20 function 3 "ATI SB400 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB400 PCI" rev 0x00
pci3 at ppb2 bus 3
rl0 at pci3 dev 11 function 0 "Realtek 8139" rev 0x10: apic 2 int 22
(irq 10), address 00:14:d1:3b:ff:db
rlphy0 at rl0 phy 0: RTL internal PHY
auixp0 at pci0 dev 20 function 5 "ATI SB400 AC97" rev 0x02: apic 2 int
17 (irq 11)
auixp0: soft resetting aclink
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auixp0
