ugh what's that? OpenBSD 4.6-current (DIRAC.MP) #13: Sun Mar 6 14:18:33 CET 2005 r...@dirac.in.chemnet:/usr/src/sys/arch/i386/compile/DIRAC.MP
you have custom kernel? Then show this error on GENERIC or GENERIC.MP ;-) See http://www.openbsd.org/faq/faq5.html#Why On Tue, Dec 15, 2009 at 1:19 PM, Peter Huncar <hu...@hunci.sk> wrote: > Hello > > It crashes every time after reboot just after sync with: > > syncing disks... done > uvm_fault(0xd08aa620, 0xefffa000, 0, 1) -> d > fatal page fault (6) in supervisor mode > trap type 6 code 0 eip efffaabb cs 8 eflags 10286 cr2 efffaabb cpl d0 > panic: trap type 6, code=0, pc=efffaabb > Starting stack trace... > panic(d08600f8,0,de15ad9c,0,d8a5ac6c) at panic+0x65 > panic(d077b327,6,0,efffaabb,d2c90800) at panic+0x65 > trap() at trap+0x11d > --- trap (number 6) --- > end(d8535d20,d2c90800,5280200,1456db) at 0xefffaabb > ciss_done(ddfbf000,ddf32000,44,6) at ciss_done+0x111 > ciss_cmd(ddfbf000,1,3,ddfbf058,d0860050) at ciss_cmd+0x26c > ciss_sync(d2c3fa00,1fc7b60f,0,1456db) at ciss_sync+0xa4 > dohooks(d085fd44,1,de15af00,d04c7f9c,d097fc60) at dohooks+0x6b > boot(0,1,de15af20,d0379970,d085ecf4) at boot+0x67 > sys_reboot(d8a5ac6c,de15af68,de15af58,d8a5ac6c) at sys_reboot+0x55 > syscall() at syscall+0x12b > --- syscall (number 55) --- > > OS setting set to Linux > APIC map to APIC Full Table > > dmesg: > OpenBSD 4.6-current (DIRAC.MP) #13: Sun Mar B 6 14:18:33 CET 2005 > B r...@dirac.in.chemnet:/usr/src/sys/arch/i386/compile/DIRAC.MP > cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > real mem B = 2147028992 (2047MB) > avail mem = 2076942336 (1980MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, > SMBIOS rev. 2.3 @ 0xec000 (42 entries) > bios0: vendor HP version "P31" date 03/03/2005 > bios0: HP ProLiant DL360 G3 > acpi0 at bios0: rev 0 > acpi0: tables DSDT FACP APIC SPCR > acpi0: wakeup devices > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 133MHz > cpu1 at mainbus0: apid 6 (application processor) > cpu1: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > cpu3 at mainbus0: apid 7 (application processor) > cpu3: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins > ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins > ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins > ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (PCI1) > acpiprt2 at acpi0: bus 4 (PCI2) > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > acpitz0 at acpi0: critical temperature 31 degC > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xee000/0x2000! > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33 > pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00 > pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00 > pci1 at pchb2 bus 1 > em0 at pci1 dev 1 function 0 "Intel PRO/1000MF (82545GM)" rev 0x04: apic 3 > int 12 (irq 10), address 00:1b:21:37:5d:e9 > bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2 > (0x1002): apic 3 int 14 (irq 11), address 00:0f:20:d1:7c:61 > brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 > vga0 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27 > wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01: > apic 3 int 15 (irq 3) > ciss0: 1 LD, HW rev 1, FW 2.76/2.76 > scsibus0 at ciss0: 1 targets > sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.76> SCSI2 0/direct > fixed > sd0: 69452MB, 512 bytes/sec, 142239510 sec total > "Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured > "Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured > piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling > iic0 at piixpm0 > spdmem0 at iic0 addr 0x54: 1GB DDR SDRAM registered ECC PC2100CL2.5 > spdmem1 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2100CL2.5 > pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CRN-8245B, 2.19> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00 > pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05 > pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05 > pci2 at pchb5 bus 4 > bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2 > (0x1002): apic 3 int 13 (irq 15), address 00:0f:20:d1:7c:5f > brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 > isa0 at mainbus0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > midi0 at pcppi0: <PC speaker> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > mtrr: Pentium Pro MTRR support > vscsi0 at root > scsibus2 at vscsi0: 256 targets > root on sd0a swap on sd0b dump on sd0b > > -- http://www.openbsd.org/lyrics.html
