I have 6 IDE devices; 4 of them are connected to the primary and
secondary IDE channels and 2 of them are connected to the SATA ports
with IDE to SATA adapter. I assumed the two drives connected to the
SATA ports would show up as sd0 and sd1, instead the show up as wd0
resp wd1. Was I wrong in my assumption?
I now have wd0-wd5, how do I get the additional devices wd4 and wd5 in
/dev/ ?
BR,
Markus
OpenBSD 4.6-current (GENERIC) #453: Fri Dec 11 17:20:19 MST 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.81
GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1610166272 (1535MB)
avail mem = 1551478784 (1479MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/03/03, BIOS32 rev. 0 @
0xf1d80, SMBIOS rev. 2.3 @ 0xf0040 (57 entries)
bios0: vendor Award Software, Inc. version "ASUS P4G8X ACPI BIOS
Revision 1006" date 06/03/2003
bios0: ASUSTeK Computer INC. P4G8X
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP BOOT APIC
acpi0: wakeup devices PCI1(S4) PCI2(S4) UAR1(S4) USB0(S4) USB1(S4) USB2
(S4) US20(S4) AC97(S4) PCI0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus 2 (PCI2)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x4000! 0xd4000/0x4800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x255d
rev 0x03
agp at pchb0 not configured
"Intel E7505 Error Reporting" rev 0x03 at pci0 dev 0 function 1 not
configured
ppb0 at pci0 dev 1 function 0 "Intel E7505 AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 GT AGP" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2
int 19 (irq 9)
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2
int 18 (irq 6)
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2
int 23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
pci2 at ppb1 bus 2
bktr0 at pci2 dev 1 function 0 "Brooktree BT878" rev 0x11: apic 2 int
22 (irq 9)
bktr0: Warning - card vendor 0x11bd (model 0x0012) unknown.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
"Brooktree BT878 Audio" rev 0x11 at pci2 dev 1 function 1 not
configured
re0 at pci2 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
(0x1000), apic 2 int 23 (irq 9), address 00:08:a1:c5:1c:5e
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
pciide0 at pci2 dev 4 function 0 "CMD Technology SiI3112 SATA" rev
0x02: DMA
pciide0: using apic 2 int 21 (irq 9) for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <Maxtor 6L200P0>
wd0: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <Maxtor 6L200P0>
wd1: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
bge0 at pci2 dev 5 function 0 "Broadcom BCM5702X" rev 0x02,
BCM5702/5703 A2 (0x1002): apic 2 int 18 (irq 6), address 00:0c:6e:0c:73:
39
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
ral0 at pci2 dev 6 function 0 "Ralink RT2661" rev 0x00: apic 2 int 20
(irq 9), address 00:13:f7:2a:f4:ab
ral0: MAC/BBP RT2661D, RF RT2529 (MIMO XR)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide1 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd2 at pciide1 channel 0 drive 0: <IC35L120AVV207-1>
wd2: 16-sector PIO, LBA48, 117800MB, 241254720 sectors
wd3 at pciide1 channel 0 drive 1: <Maxtor 6Y160P0>
wd3: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd2(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd3(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd4 at pciide1 channel 1 drive 0: <Maxtor 6Y160P0>
wd4: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd5 at pciide1 channel 1 drive 1: <Maxtor 6Y160P0>
wd5: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd4(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
wd5(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: apic 2
int 17 (irq 5), ICH4 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub4 at uhub2 port 2 "Texas Instruments TUSB2046 hub" rev 1.10/1.25
addr 2
uhidev0 at uhub4 port 3 configuration 1 interface 0 "vendor 0x06f2
product 0x0011" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 3 configuration 1 interface 1 "vendor 0x06f2
product 0x0011" rev 1.10/1.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd2a swap on wd2b dump on wd2b
