R0nin its the GENERIC kernel (cp -r GENERIC R0NIN) with this http://www.openbsd.org/errata46.html nothing more, nothing less. It's strange...
Thanks for response 2009/12/22 Aaron Mason <[email protected]>: > On Wed, Dec 23, 2009 at 10:12 AM, Gonzalo Lionel Rodriguez > <[email protected]> wrote: >> Yes, sorry: >> >> OpenBSD 4.6 (R0NIN) #0: Sun Nov 29 15:32:11 ART 2009 >> [email protected]:/usr/src/sys/arch/i386/compile/R0NIN >> cpu0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz ("GenuineIntel" >> 686-class) 2 GHz >> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR >> real mem = 1046761472 (998MB) >> avail mem = 1003307008 (956MB) >> mainbus0 at root >> bios0 at mainbus0: AT/286+ BIOS, date 04/18/08, BIOS32 rev. 0 @ >> 0xfdc80, SMBIOS rev. 2.4 @ 0xe0010 (63 entries) >> bios0: vendor LENOVO version "7NETB2WW (2.12 )" date 04/18/2008 >> bios0: LENOVO 767474Y >> acpi0 at bios0: rev 2 >> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! >> SSDT SSDT SSDT SSDT >> acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) IGBE(S4) EXP0(S4) >> EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) >> USB2(S3) USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: apic clock running at 199MHz >> cpu at mainbus0: not configured >> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins >> ioapic0: misconfigured as apic 2, remapped to apid 1 >> acpihpet0 at acpi0: 14318179 Hz >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus -1 (AGP_) >> acpiprt2 at acpi0: bus 2 (EXP0) >> acpiprt3 at acpi0: bus 3 (EXP1) >> acpiprt4 at acpi0: bus -1 (EXP2) >> acpiprt5 at acpi0: bus -1 (EXP3) >> acpiprt6 at acpi0: bus -1 (EXP4) >> acpiprt7 at acpi0: bus 5 (PCI1) >> acpiec0 at acpi0 >> acpicpu0 at acpi0: C3, C2, C1, PSS >> acpipwrres0 at acpi0: PUBS >> acpitz0 at acpi0: critical temperature 127 degC >> acpitz1 at acpi0: critical temperature 99 degC >> acpibtn0 at acpi0: LID_ >> acpibtn1 at acpi0: SLPB >> acpibat0 at acpi0: BAT0 model "42T4568" serial 6706 type LION oem "SONY" >> acpibat1 at acpi0: BAT1 not present >> acpibat2 at acpi0: BAT2 not present >> acpiac0 at acpi0: AC unit offline >> acpithinkpad0 at acpi0 >> acpidock0 at acpi0: GDCK not docked (0) >> bios0: ROM list: 0xc0000/0x10000! 0xe0000/0x10000! >> cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c >> vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> intagp0 at vga1 >> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 >> inteldrm0 at vga1: apic 1 int 16 (irq 10) >> drm0 at inteldrm0 >> "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured >> em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 1 >> int 20 (irq 11), address 00:1d:72:92:6c:8f >> uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 >> int 20 (irq 11) >> uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 >> int 21 (irq 11) >> ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 >> int 22 (irq 11) >> usb0 at ehci0: USB revision 2.0 >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 >> pci3 at ppb2 bus 5 >> cbb0 at pci3 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 >> int 16 (irq 10) >> "Ricoh 5C832 Firewire" rev 0x04 at pci3 dev 0 function 1 not configured >> sdhc0 at pci3 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 >> int 18 (irq 11) >> sdmmc0 at sdhc0 >> cardslot0 at cbb0 slot 0 flags 0 >> cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0xb0 >> pcmcia0 at cardslot0 >> pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03 >> pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, >> channel 0 configured to compatibility, channel 1 configured to >> compatibility >> pciide0: channel 0 disabled (no drives) >> pciide0: channel 1 ignored (disabled) >> ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1 >> int 16 (irq 10), AHCI 1.1 >> scsibus0 at ahci0: 32 targets >> sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD800BEVS-08, 08.0> SCSI3 0/direct fixed >> sd0: 76319MB, 512 bytes/sec, 156301488 sec total >> ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic >> 1 int 23 (irq 11) >> iic0 at ichiic0 >> usb2 at uhci0: USB revision 1.0 >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at uhci1: USB revision 1.0 >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb4 at uhci2: USB revision 1.0 >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb5 at uhci3: USB revision 1.0 >> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pms0 at pckbc0 (aux slot) >> pckbc0: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pcppi0 at isa0 port 0x61 >> midi0 at pcppi0: <PC speaker> >> spkr0 at pcppi0 >> aps0 at isa0 port 0x1600/31 >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> mtrr: Pentium Pro MTRR support >> ugen0 at uhub2 port 2 "STMicroelectronics Biometric Coprocessor" rev >> 1.00/0.01 addr 2 >> softraid0 at root >> root on sd0a swap on sd0b dump on sd0b >> >> The kernel only have the oficial patchs. >> >> Best regards >> >> 2009/12/21 Aaron Mason <[email protected]>: >>> On Mon, Dec 21, 2009 at 9:47 AM, Gonzalo Lionel Rodriguez >>> <[email protected]> wrote: >>>> Hi all. >>>> >>>> I have a problem with a few wireless networks (WPA2) and my 'iwn' (on >>>> my Thinkpad x61) in OpenBSD 4.6 (stable), the iwn0 disconnect from the >>>> network with this error: >>>> >>>> iwn0: fatal firmware error >>>> firmware error log: >>>> error type = "NMI_INTERRUPT_WDG" (0x00000004) >>>> program counter = 0x0000046C >>>> source line = 0x000000D0 >>>> error data = 0x0000000202430000 >>>> branch link = 0x00002F3E000004C2 >>>> interrupt link = 0x000006DE00002FCE >>>> time = 832655995 >>>> driver status: >>>> tx ring 0: qid=0 cur=201 queued=0 >>>> tx ring 1: qid=1 cur=0 queued=0 >>>> tx ring 2: qid=2 cur=0 queued=0 >>>> tx ring 3: qid=3 cur=0 queued=0 >>>> tx ring 4: qid=4 cur=166 queued=0 >>>> tx ring 5: qid=5 cur=0 queued=0 >>>> tx ring 6: qid=6 cur=0 queued=0 >>>> tx ring 7: qid=7 cur=0 queued=0 >>>> tx ring 8: qid=8 cur=0 queued=0 >>>> tx ring 9: qid=9 cur=0 queued=0 >>>> tx ring 10: qid=10 cur=0 queued=0 >>>> tx ring 11: qid=11 cur=0 queued=0 >>>> tx ring 12: qid=12 cur=0 queued=0 >>>> tx ring 13: qid=13 cur=0 queued=0 >>>> tx ring 14: qid=14 cur=0 queued=0 >>>> tx ring 15: qid=15 cur=0 queued=0 >>>> rx ring: cur=26 >>>> 802.11 state 4 >>>> iwn0: fatal firmware error >>>> firmware error log: >>>> error type = "NMI_INTERRUPT_WDG" (0x00000004) >>>> program counter = 0x0000046C >>>> source line = 0x000000D0 >>>> error data = 0x0000000202030000 >>>> branch link = 0x00002F3E000004C2 >>>> interrupt link = 0x000006DE00002FCE >>>> time = 2969436787 >>>> driver status: >>>> tx ring 0: qid=0 cur=137 queued=0 >>>> tx ring 1: qid=1 cur=0 queued=0 >>>> tx ring 2: qid=2 cur=0 queued=0 >>>> tx ring 3: qid=3 cur=0 queued=0 >>>> tx ring 4: qid=4 cur=92 queued=0 >>>> tx ring 5: qid=5 cur=0 queued=0 >>>> tx ring 6: qid=6 cur=0 queued=0 >>>> tx ring 7: qid=7 cur=0 queued=0 >>>> tx ring 8: qid=8 cur=0 queued=0 >>>> tx ring 9: qid=9 cur=0 queued=0 >>>> tx ring 10: qid=10 cur=0 queued=0 >>>> tx ring 11: qid=11 cur=0 queued=0 >>>> tx ring 12: qid=12 cur=0 queued=0 >>>> tx ring 13: qid=13 cur=0 queued=0 >>>> tx ring 14: qid=14 cur=0 queued=0 >>>> tx ring 15: qid=15 cur=0 queued=0 >>>> rx ring: cur=47 >>>> 802.11 state 4 >>>> >>>> With a 'dhclient iwn0' works again. >>>> >>>> Any ideas? >>>> >>>> Best regards. >>>> >>>> >>> >>> dmesg please? >>> >>> -- >>> Aaron Mason - Programmer, open source addict >>> I've taken my software vows - for beta or for worse >>> >>> >> > > Hmm... iwn isn't coming up in the dmesg. Also, could you show us the > contents of /usr/src/sys/arch/i386/compile/R0NIN so we know what > changes you've made? This appears to be a custom kernel - the sort of > thing the developers won't support[1]. > > Regards > > [1] http://www.openbsd.org/faq/faq5.html#Why > > -- > Aaron Mason - Programmer, open source addict > I've taken my software vows - for beta or for worse
