This is not a real solution, try it with DEV_UMASS4
On Tue, Dec 29, 2009 at 08:32:12PM -0600, c l wrote:
>
> Thanks, Todd Fries suggested this and it worked... Actually I had to use
> /dev/rcd1c,
>
>
>
> >I've heard report that 'eject -f /dev/rsd0c' might be one easy thing to try
> >first off.
>
>
> > Date: Wed, 30 Dec 2009 09:02:32 +1100
> > From: [email protected]
> > To: [email protected]
> > CC: [email protected]
> > Subject: Re: novatel u760 modem
> >
> > In src/sys/dev/usb/umsm.c change the line
> >
> > {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_ZEROCD2 }, 0},
> >
> > to
> >
> > {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_ZEROCD2 }, DEV_UMASS1},
> >
> > then try DEV_UMASS2, DEV_UMASS3 & DEV_UMASS4 if that doesn't work.
> >
> > On Tue, Dec 29, 2009 at 12:00:13PM -0600, c l wrote:
> > > Anyone know how to make the Novatel u760 attach with umsm? Is there
> > > something
> > > I can modify in usbdevs.h to make it work? The man page says it's
> > > "suspected"
> > > to work.
> > >
> > > usbdevs -v
> > > Controller /dev/usb0:
> > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> > > Intel(0x8086), rev 1.00
> > > port 1 powered
> > > port 2 powered
> > > port 3 addr 2: high speed, self powered, config 1, USB Mass Storage
> > > Device(0x0701), Genesyslogic(0x05e3), rev 0.33
> > > port 4 powered
> > > port 5 powered
> > > port 6 powered
> > > port 7 powered
> > > port 8 powered
> > > Controller /dev/usb1:
> > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > > Intel(0x8086), rev 1.00
> > > port 1 powered
> > > port 2 powered
> > > Controller /dev/usb2:
> > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > > Intel(0x8086), rev 1.00
> > > port 1 powered
> > > port 2 addr 2: full speed, power 500 mA, config 1, Novatel Wireless
> > > CDMA(0x5030), Novatel Wireless Inc.(0x1410), rev 0.00, iSerialNumber
> > > 091154835350000
> > > Controller /dev/usb3:
> > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > > Intel(0x8086), rev 1.00
> > > port 1 powered
> > > port 2 powered
> > > Controller /dev/usb4:
> > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > > Intel(0x8086), rev 1.00
> > > port 1 powered
> > > port 2 powered
> > >
> > >
> > >
> > >
> > > dmesg...
> > > OpenBSD 4.6-current (GENERIC) #471: Sat Dec 26 21:08:05 MST 2009
> > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
> > > cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class)
> > > 1.60
> > > GHz
> > > cpu0:
> > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A
> > > CPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,ES
> > > T,TM2
> > > real mem = 1063743488 (1014MB)
> > > avail mem = 1022042112 (974MB)
> > > mainbus0 at root
> > > bios0 at mainbus0: AT/286+ BIOS, date 12/14/06, BIOS32 rev. 0 @ 0xfd750,
> > > SMBIOS rev. 2.33 @ 0xe0010 (59 entries)
> > > bios0: vendor IBM version "74ET64WW (2.09 )" date 12/14/2006
> > > bios0: IBM 2525F6U
> > > apm0 at bios0: Power Management spec V1.2
> > > apm0: battery life expectancy 98%
> > > apm0: AC on, battery charge high, charging
> > > acpi at bios0 function 0x0 not configured
> > > pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
> > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/240 (13 entries)
> > > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> > > pcibios0: PCI bus #5 is the last bus
> > > bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000
> > > 0xdc000/0x4000!
> > > 0xe0000/0x10000
> > > cpu0 at mainbus0: (uniprocessor)
> > > cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1500, 1400, 1300, 1200,
> > > 1100,
> > > 1000, 900, 800, 600 MHz
> > > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > > mem address conflict 0x3f700000/0x80000
> > > io address conflict 0x5800/0x8
> > > io address conflict 0x5808/0x4
> > > io address conflict 0x5810/0x8
> > > io address conflict 0x580c/0x4
> > > pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> > > vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
> > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > > intagp0 at vga1
> > > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> > > inteldrm0 at vga1: irq 11
> > > drm0 at inteldrm0
> > > "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> > > ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
> > > pci1 at ppb0 bus 2
> > > bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
> > > (0x4101): irq 11, address 00:16:d3:b1:de:90
> > > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> > > uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
> > > uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
> > > uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
> > > uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
> > > ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
> > > usb0 at ehci0: USB revision 2.0
> > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> > > pci2 at ppb1 bus 4
> > > cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
> > > sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 11
> > > sdmmc0 at sdhc0
> > > iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq
> > > 11,
> > > address 00:13:ce:67:c7:5a
> > > cardslot0 at cbb0 slot 0 flags 0
> > > cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
> > > pcmcia0 at cardslot0
> > > auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11,
> > > ICH6
> > > AC97
> > > ac97: codec id 0x41445374 (Analog Devices AD1981B)
> > > ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> > > audio0 at auich0
> > > "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
> > > ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
> > > disabled
> > > pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
> > > channel
> > > 0 wired to compatibility, channel 1 wi
> > > red to compatibility
> > > wd0 at pciide0 channel 0 drive 0: <HTC426060G9AT00>
> > > wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
> > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> > > ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
> > > iic0 at ichiic0
> > > spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
> > > usb1 at uhci0: USB revision 1.0
> > > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > usb2 at uhci1: USB revision 1.0
> > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > usb3 at uhci2: USB revision 1.0
> > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > usb4 at uhci3: USB revision 1.0
> > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > isa0 at ichpcib0
> > > isadma0 at isa0
> > > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > > pckbc0 at isa0 port 0x60/5
> > > pckbd0 at pckbc0 (kbd slot)
> > > pckbc0: using irq 1 for kbd slot
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > pms0 at pckbc0 (aux slot)
> > > pckbc0: using irq 12 for aux slot
> > > wsmouse0 at pms0 mux 0
> > > pcppi0 at isa0 port 0x61
> > > midi0 at pcppi0: <PC speaker>
> > > spkr0 at pcppi0
> > > aps0 at isa0 port 0x1600/31
> > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > > biomask eff5 netmask eff5 ttymask ffff
> > > mtrr: Pentium Pro MTRR support
> > > umass0 at uhub0 port 3 configuration 1 interface 0 "Genesyslogic USB Mass
> > > Storage Device" rev 2.00/0.33 addr 2
> > > umass0: using ATAPI over Bulk-Only
> > > scsibus0 at umass0: 2 targets, initiator 0
> > > cd0 at scsibus0 targ 1 lun 0: <TEAC, DV-W28EW, R.2A> ATAPI 5/cdrom
> > > removable
> > > vscsi0 at root
> > > scsibus1 at vscsi0: 256 targets
> > > softraid0 at root
> > > root on wd0a swap on wd0b dump on wd0b
> > > umass1 at uhub2 port 2 configuration 1 interface 0 "Novatel Wireless Inc.
> > > Novatel Wireless CDMA" rev 1.10/0.00 addr 2
> > > umass1: using SCSI over Bulk-Only
> > > scsibus2 at umass1: 2 targets, initiator 0
> > > cd1 at scsibus2 targ 1 lun 0: <Novatel, Mass Storage, 1.00> SCSI2 5/cdrom
> > > removable
> > > umass2 at uhub2 port 2 configuration 1 interface 1 "Novatel Wireless Inc.
> > > Novatel Wireless CDMA" rev 1.10/0.00 addr 2
> > > umass2: using SCSI over Bulk-Only
> > > scsibus3 at umass2: 2 targets, initiator 0
> > > sd0 at scsibus3 targ 1 lun 0: <Novatel, MMC Storage, 2.31> SCSI2 0/direct
> > > removable
> > > sd0: drive offline
> > >
> > > _________________________________________________________________
> > > Hotmail: Free, trusted and rich email service.
> > > http://clk.atdmt.com/GBL/go/171222984/direct/01/
>
> _________________________________________________________________
> Hotmail: Free, trusted and rich email service.
> http://clk.atdmt.com/GBL/go/171222984/direct/01/
