Normally I have no problem with the ipw-interface (except the occasional
well-known firmware exception), but when used in a trunk failover setup
it fails to get any network. I'm succesfully using trunk on my other
machines, this is the only one with ipw interface. Cluestick anyone?
Not sure what info to provide, if-setup and dmesg below.
/Markus
$ cat /etc/hostname.ipw0
up nwid himmet wpa wpapsk [key]
$ cat /etc/hostname.bge0
up
$ cat /etc/hostname.trunk0
trunkproto failover trunkport bge0 trunkport ipw0
dhcp
$ dmesg
OpenBSD 4.6-current (GENERIC) #478: Fri Jan 1 16:00:18 MST 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 1072975872 (1023MB)
avail mem = 1030983680 (983MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/15/03, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xf8cc0 (62 entries)
bios0: vendor Dell Computer Corporation version "A09" date 12/15/2003
bios0: Dell Computer Corporation Latitude D600
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP ASF!
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) USB0(S1) USB1(S1)
USB2(S1) USB3(S1) MODM(S3) PCIE(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCIE)
acpicpu0 at acpi0: C3, C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 102 degC
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL Y13384" serial 1296 type LION oem
"Sanyo"
acpibat1 at acpi0: BAT1 model "DELL 0007P8" serial 323 type LiP oem "Sanyo"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: TV__
acpivout1 at acpivideo0: CRT_
acpivout2 at acpivideo0: CRT2
acpivout3 at acpivideo0: LCD_
acpivout4 at acpivideo0: DVI_
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1595 MHz: speeds: 1600, 1600, 1400, 1200, 1000,
800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M9" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5702X" rev 0x02, BCM5702/5703
A2 (0x1002): irq 11, address 00:0d:56:df:f9:b0
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
cbb0 at pci2 dev 1 function 0 "O2 Micro OZ711EC1 SmartCardBus" rev 0x20:
irq 11, CardBus support disabled
cbb1 at pci2 dev 1 function 1 "O2 Micro OZ711EC1 SmartCardBus" rev 0x20:
irq 11, CardBus support disabled
ipw0 at pci2 dev 3 function 0 "Intel PRO/Wireless 2100" rev 0x04: irq
11, address 00:04:23:a3:30:07
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS548040M9AT00>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11,
ICH4 AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ed6d netmask ed6d ttymask ffff
mtrr: Pentium Pro MTRR support
"O2Micro, SmartCardBus Reader, V1.0" at pcmcia1 function 0 not configured
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
