I'm receiving this error when I run make in either jdk 1.5/1.6
bash-4.0$ pwd
/usr/ports/devel/jdk
bash-4.0$ cd 1.5
bash-4.0$ make
/bin/sh: no closing quote
*** Error code 1
Stop in /usr/ports/devel/jdk/1.5 (line 1793 of
/usr/ports/infrastructure/mk/bsd.port.mk).
bash-4.0$
dmesg
OpenBSD 4.7-beta (RAMDISK_CD) #320: Sun Feb 7 17:16:02 MST 2010
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) D CPU 3.46GHz ("GenuineIntel" 686-class) 3.47 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 2146791424 (2047MB)
avail mem = 2073194496 (1977MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/24/07, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xfc360 (21 entries)
bios0: vendor American Megatrends Inc. version "5.18" date 08/24/2007
bios0: Compaq-Presario RZ537AA-ABA SR5010NX
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
bios0: ROM list: 0xc0000/0xe200
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: apic 1 int
16 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7200 GS" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82801GB HD Audio" rev 0x01 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1
int 16 (irq 10)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E
(0x3400), apic 1 int 16 (irq 10), address 00:19:21:d2:2a:ec
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1
int 23 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1
int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1
int 18 (irq 3)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1
int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1
int 23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
vendor "Conexant", unknown product 0x2f20 (class communications
subclass miscellaneous, rev 0x00) at pci3 dev 2 function 0 not
configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRRW GSA-H20L, S853> ATAPI
5/cdrom removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <Optiarc, DVD RW AD-7170A, 1.02> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3160812AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
uhub5 at uhub1 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
"HP Officejet 5600 series" rev 2.00/1.00 addr 3 at uhub5 port 1 not configured
uhidev0 at uhub5 port 4 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/11.10 addr 4
uhidev0: iclass 3/1
uhid at uhidev0 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 4.7-beta (GENERIC) #524: Sun Feb 7 17:01:17 MST 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) D CPU 3.46GHz ("GenuineIntel" 686-class) 3.47 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 2146791424 (2047MB)
avail mem = 2071392256 (1975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/24/07, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xfc360 (21 entries)
bios0: vendor American Megatrends Inc. version "5.18" date 08/24/2007
bios0: Compaq-Presario RZ537AA-ABA SR5010NX
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET
acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S3) PS2M(S3) EUSB(S4)
MC97(S4) P0P4(S4) WOL_(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4)
P0P9(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) SLPB(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpicpu0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xe200
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: apic 1 int
16 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7200 GS" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
apic 1 int 16 (irq 10)
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1
int 16 (irq 10)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E
(0x3400), apic 1 int 16 (irq 10), address 00:19:21:d2:2a:ec
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1
int 23 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1
int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1
int 18 (irq 3)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1
int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1
int 23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
vendor "Conexant", unknown product 0x2f20 (class communications
subclass miscellaneous, rev 0x00) at pci3 dev 2 function 0 not
configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRRW GSA-H20L, S853> ATAPI
5/cdrom removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <Optiarc, DVD RW AD-7170A, 1.02> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3160812AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic
1 int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL3
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL3
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8718F rev 2, EC port 0xa10
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub5 at uhub1 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
ulpt0 at uhub5 port 1 configuration 1 interface 1 "HP Officejet 5600
series" rev 2.00/1.00 addr 3
ulpt0: using bi-directional mode
uhidev0 at uhub5 port 4 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/11.10 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Regards,
Donald Cooley
