Hi,
What is the reason why some packets passing on re0 will not be seen on bridge0
given I set up the following configuration :
bridgename.bridge0
add re0
up
I expected to see all the packets passing on re0 on bridge0 too which is
obviously not the case.
# brconfig
bridge0: flags=141<UP,RUNNING,PROMISC>
priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp
re0 flags=3<LEARNING,DISCOVER>
port 2 ifpriority 0 ifcost 0
Addresses (max cache: 100, timeout: 240):
00:1f:d0:d0:db:59 re0 1 flags=0<>
00:22:b0:de:32:60 re0 1 flags=0<>
# ifconfig
re0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu
1500
lladdr 00:09:55:a9:72:81
priority: 0
groups: egress
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
inet6 fe80::208:55ff:aea8:7281%re0 prefixlen 64 scopeid 0x2
inet 10.0.1.44 netmask 0xffffff00 broadcast 10.0.1.255
enc0: flags=0<> mtu 1536
priority: 0
bridge0: flags=141<UP,RUNNING,PROMISC> mtu 1500
priority: 0
groups: bridge
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
priority: 0
groups: pflog
Regards.
