I'm adding the Xorg.0 logs.

--- On Thu, 4/15/10, Super Biscuit <[email protected]> wrote:

From: Super Biscuit <[email protected]>
Subject: Re: Xorg.conf with OpenBSD 4.6 macppc does not work with alternate
configuration
To: "Bryan Irvine" <[email protected]>
Cc: [email protected]
Date: Thursday, April 15, 2010, 1:56 AM

My apologies beforehand for using this message again.
I had set the Vert and Horiz values according to those here:
http://forums.debian.net/viewtopic.php?f=16&t=20481&start=60
The monitor I have is the same,
I did try out the recommendation and the results were the same.
I also notice that the card is listed as a rage re/sg but the /usr README
lists it
pro pf.
I have also loaded the ati driver during boot using -c DKM> enable ati.
More information: 16" diagonal for visible screen, powermac blue and white
model.

If there is anything else that I am missing, let me know.

--- On Wed, 4/14/10, Bryan Irvine <[email protected]> wrote:

From: Bryan Irvine <[email protected]>
Subject: Re: Xorg.conf with OpenBSD 4.6 macppc does not work with alternate 
configuration
To: "Super Biscuit" <[email protected]>
Cc: [email protected]
Date: Wednesday, April 14, 2010, 9:23 PM

On Wed, Apr 14, 2010 at 2:13 PM, Super Biscuit <[email protected]>
wrote:
> $uname -a
> OpenBSD moo.my.domain 4.6 GENERIC#43 macppc
>
> I have followed the howto section in the readme file and remain with an 8bit
resolution at 800x600.
> If there is anything wrong with my configuration?
> X did not start with new_xorg.conf.1.text or new_xorg.conf.2.txt.
> The only working xorg.conf which had good resolution was from a previous
debian install done with an ubuntu live disk.
> I do realize that there is a difference between the OSes; but, the xorg.conf
and resolutions should be the same for both.


I went through this a few years and got it going with a little help from
Nick.

http://marc.info/?l=openbsd-misc&m=116492822327679&w=2

-B
(--) Using wscons driver

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.6 macppc 
Current Operating System: OpenBSD moo.my.domain 4.6 GENERIC#43 macppc
Build Date: 01 July 2009  05:44:48PM
 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 14 18:55:20 2010
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 91 of section Screen in file /etc/X11/xorg.conf
        Unexpected EOF. Missing EndSection keyword?
(--) Using wscons driver

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.6 macppc 
Current Operating System: OpenBSD moo.my.domain 4.6 GENERIC#43 macppc
Build Date: 01 July 2009  05:44:48PM
 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 14 20:35:24 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "wsfb"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor"
(**) |   |-->Device "Wsdisplay0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(==) Including the default font path 
/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/OTF,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/.
(**) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF/,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/75dpi/,
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Loader magic: 0x19b199c
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 4.1
        X.Org XInput driver : 2.1
        X.Org Server Extension : 1.1
        X.Org Font Renderer : 0.6
(II) Loader running on openbsd
(--) PCI:*(0...@0:16:0) ATI Rage 128 rev 0, Mem @ 0x01a1ec68/0, 0x01a1ec68/0, 
I/O @ 0x01a1ec68/0, BIOS @ 0x????????/27389032
(II) System resource ranges:
        [0] -1  0       0x019fde80 - 0x00000000 (0x100000) MX[B]E(B)
        [1] -1  0       0x019fde80 - 0x00000000 (0xf0000) MX[B]
        [2] -1  0       0x019fde80 - 0x00000000 (0xc0000) MX[B]
        [3] -1  0       0x019fde80 - 0x00000000 (0x0) MX[B]
        [4] -1  0       0x019fde80 - 0x00000000 (0xffff) IX[B]
        [5] -1  0       0x019fde80 - 0x00000000 (0x0) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.5.3, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"

(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "wsfb"

(II) Loading /usr/X11R6/lib/modules/drivers//wsfb_drv.so
(II) Module wsfb: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 0.2.1
        ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mouse"

(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.4.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"

(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.1
(II) wsfb: driver for wsdisplay framebuffer: wsfb
(II) Primary Device is: PCI 0...@00:10:0
(WW) Falling back to old probe method for wsfb
(II) wsfb(0): using /dev/ttyC0
(II) Running in FRAMEBUFFER Mode
(**) wsfb(0): Depth 8, (--) framebuffer bpp 8
(==) wsfb(0): Default visual is PseudoColor
(==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0)
(II) wsfb(0): Vidmem: 300k
(==) wsfb(0): DPI set to (96, 96)
(**) wsfb(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"

(II) Loading /usr/X11R6/lib/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.1.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(==) wsfb(0): Backing store disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(**) Option "Protocol" "wsmouse"
(**) Mouse0: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(--) Keyboard0: using wscons layout us
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "macintosh"
(**) Keyboard0: XkbModel: "macintosh"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)

Reply via email to