Setup:
Install 1, I have a base install of 4.6 FINAL
Install 2, Upgrade of Install 1 system to 4.7 CURRENT
Issue:
When the system boots the speaker output is generating a constant tone or
buzzing sound from the moment that is loads the azalia driver.
Things I tried:
I can mute the tone by issuing the "mixerctl outputs.master.mute=on" command.
I have tried different powered and non-powered speakers, plus head phones with
no change in condition.
Can anybody shed some light on the issue? If you need further system
information, please ask.
I have included a copy of the dmesg, mixerctl, and audioctl output from the 4.7
system below.
TIA for any assistance you might provide.
# dmesg
OpenBSD 4.7-current (GENERIC) #605: Thu Apr 15 11:56:53 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C7 Processor 1800MHz ("CentaurHauls" 686-class) 1.82 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR
real mem = 2011459584 (1918MB)
avail mem = 1938014208 (1848MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/01/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.3 @ 0xfca30 (47 entries)
bios0: vendor American Megatrends Inc. version "080014" date 06/01/2009
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5a20/272 (15 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3287
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #130 is the last bus
bios0: ROM list: 0xc0000/0xde00 0xce000/0x1000
cpu0 at mainbus0: (uniprocessor)
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0410091f0400091e
cpu0: using only highest, current and lowest power states
cpu0: Enhanced SpeedStep 1818 MHz: speeds: 1800, 1800, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA P4M900 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xf0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA P4M900 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA P4M900 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA P4M900 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA P4M900 Host" rev 0x00
"VIA P4M900 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 "VIA P4M900 Security" rev 0x00
pchb6 at pci0 dev 0 function 7 "VIA P4M900 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA Chrome9 HC IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 2 function 0 "VIA P4M900 PCI-PCI" rev 0x80: irq 10
pci2 at ppb1 bus 2
ppb2 at pci0 dev 3 function 0 "VIA P4M900 PCI-PCI" rev 0x80: irq 10
pci3 at ppb2 bus 3
vge0 at pci3 dev 0 function 0 "VIA VT612x" rev 0x82: irq 10, address
00:40:63:fe:20:6f
ipgphy0 at vge0 phy 22: IP1001 10/100/1000 PHY, rev. 0
pciide0 at pci0 dev 15 function 0 vendor "VIA", unknown product 0x5287 rev 0x20:
DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using irq 5 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD1600BEKT-00A25T0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x91: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x91: irq 7
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x91: irq 5
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pchb7 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: irq 11, address
00:40:63:fe:20:70
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 0x004063,
model 0x0032
ppb3 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00
pci4 at ppb3 bus 128
ppb4 at pci4 dev 0 function 0 "VIA VT8251 PCIE" rev 0x00
pci5 at ppb4 bus 130
ppb5 at pci4 dev 0 function 1 "VIA VT8251 PCIE" rev 0x00
pci6 at ppb5 bus 129
azalia0 at pci4 dev 1 function 0 "VIA HD Audio" rev 0x00: irq 5
azalia0: codecs: VIA/0x1708
audio0 at azalia0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
schsio0 at isa0 port 0x162e/2: SCH3112 rev 0x02, watchdog disabled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fbe5 netmask ffe5 ttymask ffff
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
# mixerctl
record.adc-0:1_mute=off
record.adc-0:1=120,120
inputs.mix_source=dac-0:1,mic,line-in,mic2,dac-6:7
inputs.mix_dac-0:1=120,120
inputs.mix_mic=120,120
inputs.mix_line-in=120,120
inputs.mix_mic2=120,120
inputs.mix_dac-6:7=120,120
record.adc-0:1_source=mix
inputs.dac-4:5_mute=off
inputs.dac-4:5=126,126
inputs.dac-2:3_mute=off
inputs.dac-2:3=126,126
inputs.dac-6:7_mute=off
inputs.dac-6:7=126,126
outputs.mic_source=dac-2:3
outputs.mic_dir=input-vr50
outputs.line-in_source=dac-4:5
outputs.line-in_dir=input
outputs.line_source=mix
outputs.line_mute=off
outputs.line=126,126
outputs.line_boost=off
outputs.mic2_source=dac-6:7
outputs.mic2_dir=input-vr50
outputs.SPDIF_source=dig-dac-0:1
record.adc-2:3_source=mic2
record.adc-2:3_mute=off
record.adc-2:3=120,120
outputs.mic_sense=unplugged
outputs.line-in_sense=unplugged
outputs.line_sense=unplugged
outputs.mic2_sense=unplugged
outputs.master=126,126
outputs.master.mute=off
outputs.master.slaves=line
record.volume=120,120
record.volume.mute=off
record.volume.slaves=adc-0:1,adc-2:3
outputs.mode=analog
# audioctl
name=HD-Audio
version=1.0
config=azalia0
encodings=slinear_le:16,slinear_le:24
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=9600
hiwat=6
lowat=4
output_muted=0
monitor_gain=0
mode=
play.rate=48000
play.sample_rate=48000
play.channels=2
play.precision=16
play.encoding=slinear_le
play.gain=126
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
play.block_size=9600
play.errors=0
record.rate=48000
record.sample_rate=48000
record.channels=2
record.precision=16
record.encoding=slinear_le
record.gain=120
record.balance=32
record.port=0x0
record.avail_ports=0x0
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.block_size=9600
record.errors=0
--
Jim Lucas
