Hi (sorry for top posting) Beeing totally clueless about this except having played a bit with some other usb toys recently (separate thread about that) i would say that ugen is not uhid, if the driver expects an uhid device it will probably not work with ugen.
Best regards Jens On Mon, April 19, 2010 10:34, Jon Sjvstedt wrote: > Hello all! > > I have a brand new APC Smart-UPS 750 that I want to use with my > OpenBSD-box. > > So far I have: > * Installed the nut package nut-2.2.1p0 using pkg_add > * Added user _ups to the daemon group > * changed group for /dev/ugen0.00 to daemon (was wheel) > * Created this ups.conf file: > [ups-closetmonster] > driver = usbhid-ups > port = /dev/ugen0.00 > desc = "UPS APC Smart-UPS 750 for server closetmonster" > > When I try to start the usbhid-ups driver, it always fails: > > $ sudo usbhid-ups -DDDD -a ups-closetmonster > Network UPS Tools: 0.29 USB communication driver - core 0.32 () > > debug level is '4' > upsdrv_initups... > No appropriate HID device found > No matching HID UPS found > > Any ideas appreciated! > > > Some details: > > $ dmesg | grep ugen0 > ugen0 at uhub3 port 1 "American Power Conversion Smart-UPS 750 > FW:651.18.I USB FW:7.4" rev 1.10/0.06 addr 2 > > $ usbdevs -vd > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > NEC(0x1033), rev 1.00 > uhub0 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > NEC(0x1033), rev 1.00 > uhub1 > port 1 powered > port 2 powered > port 3 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > NEC(0x1033), rev 1.00 > uhub2 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub3 > port 1 addr 2: low speed, self powered, config 1, Smart-UPS 750 > FW:651.18.I USB FW:7.4(0x0002), American Power Conversion(0x051d), rev > 0.06, iSerialNumber AS0950242625 > ugen0 > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub4 > port 1 powered > port 2 powered > > > > -- > Jon
