Hi! Has anyone ran OpenBSD on an HP Proliant DL120 G6? It comes with an "Embedded HP NC107i" which seems to be a bge(4) based on BCM5784, according to a report in FreeBSD [1]. In OpenBSD this is already supported by bge(4). Apart from that I can't see any problems with this machine but would like to hear feedback. (full dmesg from that report inline) Thanks.
--rodolfo [1]http://lists.freebsd.org/pipermail/freebsd-net/2010-January/024265.html Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0: Thu Jan 14 20:12:47 CET 2010 root at db3.xxxxxxx.xx:/usr/obj/usr/src/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (2394.00-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106e5 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 17179869184 (16384 MB) avail memory = 16533999616 (15768 MB) ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <HP ProLiant> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci0: <base peripheral> at device 8.0 (no driver attached) pci0: <base peripheral> at device 8.1 (no driver attached) pci0: <base peripheral> at device 8.2 (no driver attached) pci0: <base peripheral> at device 8.3 (no driver attached) pci0: <base peripheral> at device 16.0 (no driver attached) pci0: <base peripheral> at device 16.1 (no driver attached) ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdfd02000-0xdfd023ff irq 16 at device 26.0 on pci0 ehci0: [ITHREAD] usbus0: EHCI version 1.0 usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci16: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci32: <ACPI PCI bus> on pcib3 bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdf900000-0xdf90ffff irq 16 at device 0.0 on pci32 miibus0: <MII bus> on bge0 brgphy0: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: f4:ce:46:0f:2a:2c bge0: [FILTER] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci34: <ACPI PCI bus> on pcib4 bge1: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdfa00000-0xdfa0ffff irq 17 at device 0.0 on pci34 miibus1: <MII bus> on bge1 brgphy1: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: f4:ce:46:0f:2a:2d bge1: [FILTER] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci36: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 18 at device 0.0 on pci36 pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci38: <ACPI PCI bus> on pcib6 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdfd02400-0xdfd027ff irq 23 at device 29.0 on pci0 ehci1: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1 pcib7: <PCI-PCI bridge> at device 30.0 on pci0 pci48: <PCI bus> on pcib7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel AHCI controller> port 0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1800-0x181f mem 0xdfd01000-0xdfd017ff irq 18 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI v1.30 controller with 6 3Gbps ports, PM supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xdc000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: unable to set the command byte. atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to set the command byte. ppc0: cannot reserve I/O port range ZFS filesystem version 3 ZFS storage pool version 14 Timecounters tick every 1.000 msec usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ad4: 152627MB <INTEL SSDSA2M160G2GC 2CV102HD> at ata2-master UDMA100 SATA 3Gb/s ad6: 152627MB <INTEL SSDSA2M160G2GC 2CV102HD> at ata3-master UDMA100 SATA 3Gb/s ad8: 152627MB <INTEL SSDSA2M160G2GC 2CV102HD> at ata4-master UDMA100 SATA 3Gb/s ad10: 152627MB <INTEL SSDSA2M160G2GC 2CV102HD> at ata5-master UDMA100 SATA 3Gb/s SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! WARNING: WITNESS option enabled, expect reduced performance. ugen1.1: <Intel> at usbus1ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 Root mount waiting for: usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen0.2: <vendor 0x8087> at usbus0 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 Root mount waiting for: usbus1 usbus0 uhub3: 6 ports with 6 removable, self powered uhub2: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.3: <Logitech> at usbus0 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.00, addr 3> on usbus0 ums0: 8 buttons and [XYZ] coordinates ID=0 ugen1.3: <ServerEngines> at usbus1 ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus1 kbd2 at ukbd0 ums1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus1 ums1: 8 buttons and [XYZ] coordinates ID=0 ugen0.4: <SanDisk> at usbus0 umass0: <SanDisk Cruzer Micro, class 0/0, rev 2.00/2.00, addr 4> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus0 umass0:0:0:-1: Attached to scbus0 Trying to mount root from zfs:zroot da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <SanDisk Cruzer Micro 8.01> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 3839MB (7862911 512 byte sectors: 255H 63S/T 489C)
