On Sat, May 29, 2010 at 10:44:46AM +0200, Joachim Schipper wrote:
> On Fri, May 28, 2010 at 05:46:35PM -0400, Tan Dang wrote:
> > Hello
> >
> > Having issues booting my new Lenovo SL410 Laptop. Used a old 4.6
> > snapshot cd to install the OS on the system. Then downloaded a new
^^^^^^^^
> > bsd.rd to install a 4.7 snapshot on the system and received these
^^^^^^^^
> > errors when booting bsd.rd or bsd after successful install. Trying to
> > install from the 4.6 snapshot cd again, gives me the page fault errors
> > now too.
>
>
> Try booting with the 'verbose' option (boot -c; verbose; quit); it may
> give more information what is going wrong, and you may then be able to
> disable the specific device.
>
> For comparison, my mostly-equivalent SL510 boots fine; dmesg below.
>
> Have you tried -current?
^^^^^^^^^^^^^^^^^^^^^^^^
That was spectacularly helpful, if I do so say so myself.
Here's a dmesg from (the same?) bsd.rd you used.
I presume the device has been properly powered off between the attempts
at booting? Does Windows work?
Joachim
OpenBSD 4.7-current (RAMDISK_CD) #442: Tue May 25 00:09:59 MDT 2010
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2003517440 (1910MB)
avail mem = 1938280448 (1848MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe0010 (44 entries)
bios0: vendor LENOVO version "6JET77WW (1.35 )" date 04/30/2010
bios0: LENOVO 28477LG
acpi at bios0 not configured
mpbios at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz, 2095.11 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: irq 10
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: irq 10
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: irq 10
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 2
"JMicron SD/MMC" rev 0x00 at pci1 dev 0 function 0 not configured
"JMicron SD Host Controller" rev 0x00 at pci1 dev 0 function 2 not configured
"JMicron Memory Stick" rev 0x00 at pci1 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci1 dev 0 function 4 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: irq 10
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: irq 10
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: irq 10
pci4 at ppb3 bus 5
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: irq 10, MIMO
1T2R, BGS, address 00:1e:64:6b:9a:7c
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: irq 11
pci5 at ppb4 bus 6
ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: irq 10
pci6 at ppb5 bus 8
re0 at pci6 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
irq 11, address 00:26:9e:b2:07:4f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: irq 10
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: irq 10
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: irq 10
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci7 at ppb6 bus 9
"Intel 82801IBM LPC" rev 0x03 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: irq 10, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSA2M080, 2CV1> SCSI3 0/direct fixed
sd0: 76319MB, 512 bytes/sec, 156301488 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50N, RS06> ATAPI 5/cdrom
removable
"Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 4480 blocks
"Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/82.54 addr 2 at
uhub1 port 6 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
