hi, # uname -a OpenBSD bull.ulgsm 4.7 GENERIC.MP#11 sparc64
Installed from iso snabshot 2010-06-02 on sun Netra T2000 with Qlogic psi express cart. ips driver found 2300 cart, but no scsibus and no sd. 2313 found ips and scsibus, but not sd. In google i found http://readlist.com/lists/openbsd.org/misc/5/29424.html hoe must seen my cards: <===== good stuff=====> isp0 at pci3 dev 3 function 0 "QLogic ISP2300" rev 0x01: irq 11 scsibus2 at isp0: 256 targets sd2 at scsibus2 targ 0 lun 1: <APPLE, Xserve RAID, 1.26> SCSI5 0/ direct fixed sd2: 478736MB, 59842 cyl, 128 head, 128 sec, 512 bytes/sec, 980451328 sec total <==================> my dmesg for qlogic 2300 console is /virtual-devi...@100/cons...@1 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.7-current (GENERIC.MP) #11: Tue Jun 1 20:51:27 MDT 2010 [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP real mem = 8455716864 (8064MB) avail mem = 8239194112 (7857MB) mainbus0 at root: Netra T2000 cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu1 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu2 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu3 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu4 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu5 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu6 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu7 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu8 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu9 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu10 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu11 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu12 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu13 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu14 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu15 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz vbus0 at mainbus0 "flashprom" at vbus0 not configured cbus0 at vbus0 "virtual-channel" at cbus0 not configured "virtual-channel-client" at cbus0 not configured "virtual-channel" at cbus0 not configured vcons0 at vbus0: ivec 0x111 vrtc0 at vbus0 "fma" at vbus0 not configured "sunvts" at vbus0 not configured "sunmc" at vbus0 not configured "explorer" at vbus0 not configured "led" at vbus0 not configured "flashupdate" at vbus0 not configured "ncp" at vbus0 not configured "telco-alarm" at vbus0 not configured vpci0 at mainbus0: bus 2 to 9, dvma map 80000000-ffffffff pci0 at vpci0 ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xbc pci1 at ppb0 bus 3 ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xbc pci2 at ppb1 bus 4 em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: ivec 0x795, address 00:14: 4f:e6:14:f0 em1 at pci2 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: ivec 0x796, address 00:14: 4f:e6:14:f1 ppb2 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xbc pci3 at ppb2 bus 5 ppb3 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xbc: ivec 0x794 pci4 at ppb3 bus 6 ppb4 at pci4 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 pci5 at ppb4 bus 7 isp0 at pci5 dev 1 function 0 "QLogic ISP2300" rev 0x01: ivec 0x795 ppb5 at pci4 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 pci6 at ppb5 bus 8 ppb6 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xbc pci7 at ppb6 bus 9 mpi0 at pci7 dev 0 function 0 "Symbios Logic SAS1064E" rev 0x02: ivec 0x795 scsibus0 at mpi0: 63 targets sd0 at scsibus0 targ 1 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed sd0: 139945MB, 512 bytes/sec, 286607360 sec total vpci1 at mainbus0: bus 2 to 11, dvma map 80000000-ffffffff pci8 at vpci1 ppb7 at pci8 dev 0 function 0 "PLX PEX 8532" rev 0xbc pci9 at ppb7 bus 3 ppb8 at pci9 dev 1 function 0 "PLX PEX 8532" rev 0xbc pci10 at ppb8 bus 4 ppb9 at pci10 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 pci11 at ppb9 bus 5 ebus0 at pci11 dev 2 function 0 "Acer Labs M1533 ISA" rev 0x00 com0 at ebus0 addr 3f8-3ff ivec 0x2: ns16550a, 16 byte fifo ohci0 at pci11 dev 5 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7c1, version 1.0, legacy support ohci1 at pci11 dev 6 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7c3, version 1.0, legacy support pciide0 at pci11 dev 8 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA, channel 0 configure d to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x7c4 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-T632A, SR03> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 ppb10 at pci10 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 pci12 at ppb10 bus 6 ppb11 at pci9 dev 2 function 0 "PLX PEX 8532" rev 0xbc pci13 at ppb11 bus 7 em2 at pci13 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: ivec 0x7d6, address 00:14 :4f:e6:14:f2 em3 at pci13 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: ivec 0x7d7, address 00:14 :4f:e6:14:f3 ppb12 at pci9 dev 8 function 0 "PLX PEX 8532" rev 0xbc: ivec 0x7d4 pci14 at ppb12 bus 8 ppb13 at pci9 dev 9 function 0 "PLX PEX 8532" rev 0xbc: ivec 0x7d6 pci15 at ppb13 bus 9 ppb14 at pci15 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 pci16 at ppb14 bus 10 ppb15 at pci15 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 pci17 at ppb15 bus 11 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root bootpath: /p...@780,0/p...@0,0/p...@9,0/s...@0,0/d...@1,0 root on sd0a swap on sd0b dump on sd0b WARNING: / was not properly unmounted If need i can give Any more info and make any tests. -- alexs
