On my firewall at home, on occasion, running systat queues leaves me with an
unresponsive system. pings are not returned and the keyboard at the console
is unresponsive. Sometimes the command works fine and sometimes it does
not--though it does system the issue is more likely to occur when the system
has an uptime of more than a week or two. I'm uncertain how to troubleshoot
this further and I have been unable to reproduce the issue on other
4.7-stable systems (though these other systems are not running the same
hardware and software).
Any ideas appreciated.
OpenBSD 4.7 (GENERIC) #0: Wed May 19 21:44:26 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 446 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,
SSE
real mem = 334458880 (318MB)
avail mem = 315371520 (300MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/12/01, BIOS32 rev. 0 @ 0xfbf92,
SMBIOS rev. 2.3 @ 0xec000 (45 entries)
bios0: vendor TOSHIBA version "Version 2.60" date 10/12/2001
bios0: TOSHIBA Satellite Pro 4600
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 2:12 hours
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01c0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xe0000/0x10000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x11
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf0000000, size 0x2400000
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade XP" rev 0x63
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
pci2 at ppb1 bus 2
mem address conflict 0x14000000/0x1000
mem address conflict 0x14001000/0x1000
fxp0 at pci2 dev 8 function 0 "Intel 82562" rev 0x03, i82562: irq 11,
address 00:00:39:a4:df:32
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cbb0 at pci2 dev 13 function 0 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
cbb1 at pci2 dev 13 function 1 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6026GAX>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2502, 1313> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 11
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x03: irq 11
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x03: irq 11, ICH2
AC97
ac97: codec id 0x594d4800 (Yamaha YMF743-S)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801BA Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask ef6d netmask ef6d ttymask ffff
mtrr: Pentium Pro MTRR support
fxp1 at cardbus0 dev 0 function 0 "Intel 8255x" rev 0x09: irq 11, address
00:a0:c9:bc:ad:ad
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
fxp2 at cardbus1 dev 0 function 0 "Intel 8255x" rev 0x09: irq 11, address
00:03:47:18:1f:5d
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
