On Sat, Jun 19, 2010 at 10:57 AM, Marco Peereboom <[email protected]> wrote: > This is going to be the weirdest thing you heard all week but here goes. > > Drop in a bootable cd (like windows) and boot. B When it asks for you to > press the key to boot don't; just let it fall through and tada it boots > afterward (maybe).
Man, I _really_ wanted this to work, but it didn't. I'm having the exact same problem (booting to either the OpenBSD 4.7 i386 or amd64 disc) on an HP Compaq dc5850 (currently running a basic/default installation of Fedora 12). It'll boot to a Slackware 13.1 disc and a Windows XP SP-1 disc, but not the aforementioned OpenBSD discs, nor a BSDanywhere 4.6 disc. For what it's worth, I've had this problem before (with the OpenBSD 4.4 or 4.5 release) on an old Dell Dimension. If you really need its specs, I can dig it out of the closet. Here's the dmesg for the HP Compaq dc5850: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.14-127.fc12.x86_64 ([email protected]) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #1 SMP Fri May 28 04:30:39 UTC 2010 Command line: ro root=/dev/mapper/vg_tolstoy-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007dfb6b00 (usable) BIOS-e820: 000000007dfb6b00 - 0000000080000000 (reserved) BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved) BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved) DMI 2.5 present. last_pfn = 0x7dfb6 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-E3FFF write-protect E4000-EFFFF write-back F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 007E000000 mask FFFE000000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2016MB, range: 32MB, type UC total RAM covered: 2016M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64M num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2016MB, range: 32MB, type UC initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007dfb6000 0000000000 - 007de00000 page 2M 007de00000 - 007dfb6000 page 4k kernel direct mapping tables up to 7dfb6000 @ 8000-c000 RAMDISK: 3745f000 - 37fef9e3 ACPI: RSDP 00000000000e6c10 00014 (v00 COMPAQ) ACPI: RSDT 000000007dfc6b40 00040 (v01 HPQOEM SLIC-BPC 20080409 00000000) ACPI: FACP 000000007dfc6be8 00074 (v01 COMPAQ HP_RS780 00000001 00000000) ACPI: DSDT 000000007dfc6f5f 0971A (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) ACPI: FACS 000000007dfc6b00 00040 ACPI: APIC 000000007dfc6c5c 00084 (v01 COMPAQ HP_RS780 00000001 00000000) ACPI: ASF! 000000007dfc6ce0 00063 (v32 COMPAQ HP_RS780 00000001 00000000) ACPI: MCFG 000000007dfc6d43 0003C (v01 COMPAQ HP_RS780 00000001 00000000) ACPI: TCPA 000000007dfc6d7f 00032 (v01 COMPAQ HP_RS780 00000001 00000000) ACPI: SLIC 000000007dfc6db1 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000) ACPI: HPET 000000007dfc6f27 00038 (v01 COMPAQ HP_RS780 00000001 00000000) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007dfb6000 Bootmem setup node 0 0000000000000000-000000007dfb6000 NODE_DATA [000000000000a000 - 000000000001ffff] bootmap [0000000000020000 - 000000000002fbf7] pages 10 (7 early reservations) ==> bootmem [0000000000 - 007dfb6000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001a56ee8] TEXT DATA BSS ==> [0001000000 - 0001a56ee8] #3 [003745f000 - 0037fef9e3] RAMDISK ==> [003745f000 - 0037fef9e3] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0001a57000 - 0001a57134] BRK ==> [0001a57000 - 0001a57134] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007dfb6 On node 0 totalpages: 515925 DMA zone: 56 pages used for memmap DMA zone: 101 pages reserved DMA zone: 3842 pages, LIFO batch:0 DMA32 zone: 6999 pages used for memmap DMA32 zone: 504927 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10028300 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:74000000) Booting paravirtualized kernel on bare hardware NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s90392 r8192 d24296 u524288 pcpu-alloc: s90392 r8192 d24296 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 508769 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/vg_tolstoy-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 5f80000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2011728k/2064088k available (4468k kernel code, 388k absent, 51972k reserved, 3726k data, 940k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:440 Console: colour VGA+ 80x25 console [tty0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 HPET: 4 timers in total, 1 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2693.273 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5386.54 BogoMIPS (lpj=2693273) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 23789 entries in 94 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) Dual Core Processor 5200B stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) Dual Core Processor 5200B stepping 02 System has AMD C1E enabled Brought up 2 CPUs Total of 2 processors activated (10771.57 BogoMIPS). Switch to broadcast mode on CPU1 sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5976 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Switch to broadcast mode on CPU0 devtmpfs: initialized regulator: core version 0.5 Time: 2:42:21 Date: 06/20/10 NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [80000000, ffffffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [80000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 64 PCI: MCFG area at f4000000 reserved in E820 PCI: updated MCFG configuration 0: base f4000000 segment 0 buses 0 - 31 PCI: Using MMCONFIG at f4000000 - f5ffffff PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007bb5e220), AE_ALREADY_EXISTS ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336) ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0x2120-0x2127] pci 0000:00:11.0: reg 14 io port: [0x2140-0x2143] pci 0000:00:11.0: reg 18 io port: [0x2128-0x212f] pci 0000:00:11.0: reg 1c io port: [0x2144-0x2147] pci 0000:00:11.0: reg 20 io port: [0x2100-0x210f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe308000-0xfe3083ff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10 32bit mmio: [0xfe304000-0xfe304fff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe305000-0xfe305fff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe308400-0xfe3084ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfe306000-0xfe306fff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe307000-0xfe307fff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe308500-0xfe3085ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.2: reg 10 64bit mmio: [0xfe300000-0xfe303fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:05.0: reg 10 32bit mmio pref: [0xfc000000-0xfdffffff] pci 0000:01:05.0: reg 14 io port: [0x1100-0x11ff] pci 0000:01:05.0: reg 18 32bit mmio: [0xfe100000-0xfe10ffff] pci 0000:01:05.0: reg 24 32bit mmio: [0xfe000000-0xfe0fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x1000-0x1fff] pci 0000:00:01.0: bridge 32bit mmio: [0xfe000000-0xfe1fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xfc000000-0xfdffffff] pci 0000:3f:00.0: reg 10 64bit mmio: [0xfe200000-0xfe20ffff] pci 0000:3f:00.0: PME# supported from D3hot D3cold pci 0000:3f:00.0: PME# disabled pci 0000:00:06.0: bridge 32bit mmio: [0xfe200000-0xfe2fffff] pci 0000:00:14.4: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IGFX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007bb5e220), AE_ALREADY_EXISTS ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:0d: ioport range 0x40b-0x40b has been reserved system 00:0d: ioport range 0x4d0-0x4df has been reserved system 00:0e: ioport range 0x800-0x87f has been reserved system 00:0e: ioport range 0x880-0x88f has been reserved system 00:0e: ioport range 0xc00-0xc1f has been reserved system 00:0e: ioport range 0xc50-0xc6f has been reserved system 00:0e: ioport range 0xcd0-0xcdf has been reserved system 00:0e: ioport range 0xf800-0xf87f has been reserved system 00:0e: ioport range 0xf880-0xf8ff has been reserved system 00:0e: ioport range 0xf900-0xf97f has been reserved system 00:0e: ioport range 0xf980-0xf9ff has been reserved system 00:0e: ioport range 0xfa00-0xfa7f has been reserved system 00:0e: ioport range 0xfa80-0xfaff has been reserved system 00:0e: ioport range 0xfc00-0xfc7f has been reserved system 00:0e: ioport range 0xfd00-0xfd7f has been reserved system 00:0e: ioport range 0xfd80-0xfdff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved system 00:0f: iomem range 0xe4000-0xfffff could not be reserved system 00:0f: iomem range 0xfec01000-0xfecfffff has been reserved system 00:0f: iomem range 0xfed00400-0xfed3ffff has been reserved system 00:0f: iomem range 0xfed45000-0xffffffff has been reserved system 00:0f: iomem range 0xf4000000-0xf7ffffff has been reserved system 00:0f: iomem range 0xd1400-0xe3fff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x1000-0x1fff pci 0000:00:01.0: MEM window: 0xfe000000-0xfe1fffff pci 0000:00:01.0: PREFETCH window: 0x000000fc000000-0x000000fdffffff pci 0000:00:06.0: PCI bridge, secondary bus 0000:3f pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: 0xfe200000-0xfe2fffff pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:14.4: PCI bridge, secondary bus 0000:07 pci 0000:00:14.4: IO window: disabled pci 0000:00:14.4: MEM window: disabled pci 0000:00:14.4: PREFETCH window: disabled alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff] pci_bus 0000:01: resource 1 mem: [0xfe000000-0xfe1fffff] pci_bus 0000:01: resource 2 pref mem [0xfc000000-0xfdffffff] pci_bus 0000:3f: resource 1 mem: [0xfe200000-0xfe2fffff] pci_bus 0000:07: resource 3 io: [0x00-0xffff] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11842k freed audit: initializing netlink socket (disabled) type=2000 audit(1277001740.420:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3952 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:06.0: irq 25 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: processor limited to max C-state 1 processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 tpm_tis 00:0b: 1.2 TPM (device-id 0xB, rev-id 16) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ahci 0000:00:11.0: version 3.0 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1...@0xfe308000 port 0xfe308100 irq 22 ata2: SATA max UDMA/133 abar m1...@0xfe308000 port 0xfe308180 irq 22 ata3: SATA max UDMA/133 abar m1...@0xfe308000 port 0xfe308200 irq 22 ata4: SATA max UDMA/133 abar m1...@0xfe308000 port 0xfe308280 irq 22 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe308400 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.14-127.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe308500 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.14-127.fc12.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe304000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.14-127.fc12.x86_64 ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe305000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.14-127.fc12.x86_64 ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe306000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.14-127.fc12.x86_64 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe307000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.14-127.fc12.x86_64 ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 14:395:713 rtc_cmos 00:03: setting system clock to 2010-06-20 02:42:23 UTC (1277001743) Initalizing network drop monitor service ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-7: ST380815AS, 3.CHH, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.CH PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata2.00: ATAPI: ATAPI DVD C DH48C2S, NH37, max UDMA/100 ata2.00: configured for UDMA/100 sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM ATAPI DVD C DH48C2S NH37 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 0x/125x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Freeing unused kernel memory: 940k freed Write protecting the kernel read-only data: 6600k dracut: dracut-005-2.fc12 udev: starting version 145 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFE100000 [drm] register mmio size: 65536 ATOM BIOS: HP_UnderDog [drm] Clocks initialized ! [drm] Detected VRAM RAM=32M, BAR=32M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 1012256 kiB. [drm] radeon: 32M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RS780 Microcode platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin usb 4-2: new low speed USB device using ohci_hcd and address 2 platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] DVI-D [drm] HPD1 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP1: INTERNAL_KLDSCP_LVTMA [drm] fb mappable at 0xFC141000 [drm] vram apper at 0xFC000000 [drm] size 1310720 [drm] fb depth is 8 [drm] pitch is 1280 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x64 usb 4-2: New USB device found, idVendor=045e, idProduct=00d1 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: Microsoft Optical Mouse with Tilt Wheel usb 4-2: Manufacturer: Microsoft usb 4-2: configuration #1 chosen from 1 choice fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3 generic-usb 0003:045E:00D1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:12.1-2/input0 dracut: Starting plymouth daemon usb 4-3: new low speed USB device using ohci_hcd and address 3 dracut: Scanning devices sda2 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_tolstoy" using metadata type lvm2 usb 4-3: New USB device found, idVendor=045e, idProduct=000b usb 4-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-3: Product: Microsoft Natural Keyboard Elite usb 4-3: configuration #1 chosen from 1 choice input: Microsoft Natural Keyboard Elite as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input4 generic-usb 0003:045E:000B.0002: input,hidraw1: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Elite] on usb-0000:00:12.1-3/input0 dracut: 2 logical volume(s) in volume group "vg_tolstoy" now active EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_tolstoy-lv_root dracut: Loading SELinux policy type=1404 audit(1277001744.910:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 164886 rules. SELinux: 8192 avtab hash slots, 164886 rules. SELinux: 8 users, 12 roles, 3128 types, 152 bools, 1 sens, 1024 cats SELinux: 77 classes, 164886 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1277001745.238:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 ACPI: WMI: Mapper loaded tg3.c:v3.102 (September 1, 2009) tg3 0000:3f:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 tg3 0000:3f:00.0: setting latency timer to 64 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:24:21:0c:43:f9 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfc00, revision 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: HP WMI hotkeys as /devices/virtual/input/input5 EDAC MC: Ver: 2.1.0 May 28 2010 EDAC amd64_edac: Ver: 3.2.0 May 28 2010 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) amd64_edac: probe of 0000:00:18.2 failed with error -22 parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ppdev: user-space parallel port driver type=1400 audit(1277001749.940:4): avc: denied { mmap_zero } for pid=643 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6 device-mapper: multipath: version 1.1.0 loaded EXT4-fs (sda1): mounted filesystem with ordered data mode SELinux: initialized (dev sda1, type ext4), uses xattr Adding 4063224k swap on /dev/mapper/vg_tolstoy-lv_swap. Priority:-1 extents:1 across:4063224k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 5200B processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0x8 powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0x9 powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xb powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xd powernow-k8: 4 : fid 0xc (2000 MHz), vid 0xf powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x11 powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 Clocksource tsc unstable (delta = -292210187 ns) RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 tg3 0000:3f:00.0: irq 26 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 eth0: no IPv6 routers present fuse init (API version 7.13) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts
