On 10 July 2010 06:58, Joel Sing <js...@openbsd.org> wrote:
> Hi Ariel/Fred,
>
> Could one of you please try a current kernel with softraid disabled (boot
> with 'bsd -c' and type 'disable softraid' and then 'quit' at the UKC
prompt)
> and let me know if this resolves the issue?
>
> Thanks,
>
> Joel
Hi Joel,
Booting with softraid disabled does not solve the issue.
Hopefully, I'll find time over the next few weeks to do more investigations
thanks
Fred
Output of boot process follows:
Connected
>> OpenBSD/i386 BOOT 3.02
boot> bsd -c
booting hd0a:bsd:
/-\|/8127708-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+1088136\
[61+365104|/-\|/-\|/-\|/-\|/-\|/+350630-\|/-\|/-\|/-\|/-\|/-]=0x978d18
entry point at 0x200120
[ using 716212 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.7-current (GENERIC) #111: Sat Jul 10 00:33:14 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 121 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
real mem = 16478208 (15MB)
avail mem = 6356992 (6MB)
User Kernel Config
UKC> disable softraid
9 softraid0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/11/97
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe4000/0xc000
cpu0 at mainbus0: (uniprocessor)
cpu0: F00F bug workaround installed
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <BI-MDDAL2-6102>
wd0: 16-sector PIO, LBA, 1551MB, 3177216 sectors
wd0(wdc0:0:0): using BIOS timings
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
xe0 at pcmcia0 function 0 "Xircom, CreditCard 10Base-T, PS-CE2-10"
port 0x340/16, irq 9: address 00:80:c7:42:37:d9
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 11, polling enabled
biomask e145 netmask e345 ttymask fbdf
vscsi0 at root
scsibus0 at vscsi0: 256 targets
root device softraid not configured
kernel: integer divide fault trap, code=0
Stopped at cpu_switchto+0x76: popl %ebx
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
8 0 0 0 2 0x100200 pfpurge
7 0 0 0 2 0x100200 pcic0,0,1
6 0 0 0 2 0x100200 pcic0,0,0
5 0 0 0 2 0x100200 apm0
4 0 0 0 2 0x100200 syswq
3 0 0 0 2 0x100200 idle0
2 0 0 0 2 0x100200 kmthread
* 1 0 0 0 7 0 swapper
0 -1 0 0 3 0x80200 wdccmd swapper
ddb> trace
cpu_switchto(d0202fe5,0,d0b7af08,d03ecf17,d09a1458) at cpu_switchto+0x76
end(0,0,0,efffeecc,efffeecc) at 0xd0b7aed8
(null)(d0d1c004,d0997aa0,0,73637376,3069) at 0
ddb> boot poweroff
Attempting to power down...
~
[EOT]
