> > Does it work after the installation? The installation media is supposed
>
> I don't think so.
> The device is recognized.
> ifconfig reports stuff.
> I think I even got a DHCP address, but can't ping anything.
Hmm... did the particular wireless chip change on recent models? On the
gdium here it attaches as:
ral0 at pci0 dev 13 function 0 "Ralink RT2561S" rev 0x00: irq 6, address
00:0e:8e:1f:03:3a
ral0: MAC/BBP RT2561C, RF RT2527
...and I can connect to the neighbour's access point with a simple
``dhclient ral0''.
> > This is vecause you copied boot, bsd and bsd.rd to the root of the
>
> Aha. And "boot" varies, per configuration? The one I put there might not be
> correct?
No, `boot' is the same for all supported loongson systems. But if you
copy it to the root of the ext2fs partition, you can't create a
directory of the same name.
I.e. your partition contains
/boot
/bsd
while the installer and the documentation expect
/boot/
/boot/boot
/boot/bsd
but your layout is fine as long as you update the PMON paths to not have
the `boot/' subdirectory in them.
Miod
