Hello:
For a while now I have wanted to use the KDM login screen. However
the problem I'm facing is that KDM doesn't use fbtab by default like
login does. I want KDM to set device permissions, but for the life of me
in all my research I can't find any information about how to configure
kdm to do that. If this is not possible then I can deal with that, but if
it is possible, can someone at least please point me to the right
documentation or just outright tell me how to do it. I don't mind
reading any material, as I do enjoy learning about OpenBSD.
I just want to stop running around in circles on this.
DMESG as follows:
OpenBSD 4.7 (GENERIC) #112: Wed Mar 17 20:43:49 MDT 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1072627712 (1022MB)
avail mem = 1032663040 (984MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F18" date
03/30/2006
bios0: Gigabyte Technology Co., Ltd. nForce
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices HUB0(S5) HUB1(S4) USB0(S3) USB1(S3) USB2(S3) F139(S3)
MMAC(S5) MMCI(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 2010.02 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 200MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (HUB0)
acpiprt2 at acpi0: bus 1 (AGPB)
acpiprt3 at acpi0: bus -1 (HUB1)
acpicpu0 at acpi0: PSS
acpipwrres0 at acpi0: ISAV
acpibtn0 at acpi0: PWRB
cpu0: Cool'n'Quiet K8 2010 MHz: speeds: 2000 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
agp at pchb0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 250 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 250 SMBus" rev 0xa1
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: apic 2 int
20 (irq 5), version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: apic 2 int
20 (irq 5), version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB" rev 0xa2: apic 2 int
20 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: apic 2 int 20
(irq 10), address 00:14:85:f4:a2:4b
icsphy0 at nfe0 phy 1: ICS1893 10/100 PHY, rev. 1
auich0 at pci0 dev 6 function 0 "NVIDIA nForce3 250 AC97" rev 0xa1: apic 2
int 20 (irq 9), nForce3 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850 rev 0)
audio0 at auich0
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3300831A>
wd0: 16-sector PIO, LBA48, 286167MB, 586070255 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, DVD+-RW DVD8701, 5D24> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
sd0 at scsibus1 targ 0 lun 0: <IOMEGA, ZIP 250, 51.G> ATAPI 0/direct
removable
sd0: drive offline
sd0(pciide0:1:1): using PIO mode 3
pciide1 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using apic 2 int 20 (irq 11) for native-PCI interrupt
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7600 GS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
"Creative Labs SoundBlaster Audigy LS" rev 0x00 at pci2 dev 9 function 0 not
configured
"ESS ES2898 Modem" rev 0x02 at pci2 dev 10 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 6, EC port 0x290
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhub3 at uhub0 port 1 "NEC product 0x0059" rev 2.00/1.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
