On Tue, Aug 31, 2010 at 12:09:44AM +0900, k z wrote: > Hello, > > On NEC (AileNX) AL20C bsd.rd reboots before reaching install prompt. > Is anyone interested in this? > > Sorry for the noise if yet another user error.
You need a newer snapshot. This was (or at least appears to be) a known and resolved issue, one of GCC4's surprise presents as I recall. .... Ken > > ---------- > boot> boot /bsd.rd > booting hd0a:/bsd.rd: 5869116+942776 [61+224832+212939]=0x6ea0dc > entry point at 0x200120 > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.8 (RAMDISK_CD) #88: Wed Aug 11 10:26:02 MDT 2010 > [email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 201 MHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX > real mem = 167276544 (159MB) > avail mem = 157679616 (150MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 07/15/95, BIOS32 rev. 0 @ 0xfdb80 > apm0 at bios0: Power Management spec V1.2 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf61c0/96 (4 entries) > pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 ISA and IDE" rev > 0x00) > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xc000 > cpu0 at mainbus0: (uniprocessor) > cpu0: F00F bug workaround installed > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01 > vga1 at pci0 dev 2 function 0 "Neomagic Magicgraph NM2160" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > cbb0 at pci0 dev 3 function 0 "TI PCI1131 CardBus" rev 0x01: irq 11 > cbb1 at pci0 dev 3 function 1 "TI PCI1131 CardBus" rev 0x01: irq 11 > pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01 > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <HTS424040M9AT00> > wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 3 > "Intel 82371AB Power" rev 0x01 at pci0 dev 7 function 3 not configured > "AT&T/Lucent K56flex DSVD LTMODEM" rev 0x00 at pci0 dev 11 function 0 > not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x20 > pcmcia1 at cardslot1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > isapnp0 at isa0 port 0x279: read port 0x243 > "ESS ES1869 Plug and Play AudioD, ESS0006, , " at isapnp0 port 0x800/8 > not configured > "ESS ES1869 Plug and Play AudioD, ESS1869, , " at isapnp0 port > 0x220/16,0x388/4,0x330/2 irq 5 drq 1,0 not configured > "ESS ES1869 Plug and Play AudioD, ESS0001, , " at isapnp0 port 0x201/1 > not configured > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > biomask ffcd netmask ffcd ttymask ffff > rd0: fixed, 3800 blocks > > ---------- > after install to that wd0 on another machine, bsd does work nicely: > > OpenBSD 4.8 (GENERIC) #135: Wed Aug 11 10:08:38 MDT 2010 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 201 MHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX > real mem = 167276544 (159MB) > avail mem = 154632192 (147MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 07/15/95, BIOS32 rev. 0 @ 0xfdb80 > apm0 at bios0: Power Management spec V1.2 > apm0: AC on, battery charge unknown > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf61c0/96 (4 entries) > pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 ISA and IDE" rev > 0x00) > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xc000 > cpu0 at mainbus0: (uniprocessor) > cpu0: F00F bug workaround installed > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01 > vga1 at pci0 dev 2 function 0 "Neomagic Magicgraph NM2160" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > cbb0 at pci0 dev 3 function 0 "TI PCI1131 CardBus" rev 0x01: irq 11 > cbb1 at pci0 dev 3 function 1 "TI PCI1131 CardBus" rev 0x01: irq 11 > piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01 > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <HTS424040M9AT00> > wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 3 > piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x01: SMI > iic0 at piixpm0 > iic0: addr 0x18 00=38 01=00 02=0a 03=00 04=fe 05=10 06=00 07=00 08=00 > 09=00 0a=91 0b=f0 0d=00 0e=00 0f=00 10=00 11=00 12=00 13=38 14=00 > 15=00 16=00 17=00 18=00 19=00 1a=00 1b=00 1c=00 1d=00 1e=00 1f=00 > words 00=38ff 01=0000 02=0a00 03=0041 04=feff 05=10a0 06=0088 07=0000 > lmtemp0 at iic0 addr 0x48: lm75 > "AT&T/Lucent K56flex DSVD LTMODEM" rev 0x00 at pci0 dev 11 function 0 > not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x20 > pcmcia1 at cardslot1 > isa0 at piixpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > isapnp0 at isa0 port 0x279: read port 0x283 > "ESS ES1869 Plug and Play AudioD, ESS0006, , " at isapnp0 port 0x800/8 > not configured > ess0 at isapnp0 "ESS ES1869 Plug and Play AudioD, ESS1869, , " port > 0x220/16,0x388/4,0x330/2 irq 5 drq 1,0: essmatch failed > joy0 at isapnp0 "ESS ES1869 Plug and Play AudioD, ESS0001, , " port > 0x201/1 > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > biomask ef4d netmask ef4d ttymask ffff > wi0 at pcmcia0 function 0 "BUFFALO, WLI-PCM-L11G, Version 01.01" port > 0xa000/64 > wi0: Firmware 6.16 variant 1, address <...> > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > > ---------- > compiled bsd.rd with these options does boot up to the > install prompt (so far did not try if it will not reboot > during install): > > in RAMDISK_CD: > makeoptions DEBUG="-g" > option APMDEBUG > > boot> boot /bsd.rd.dev > booting hd0a:/bsd.rd.dev: 5873212+942784 [61+224864+213083]=0x6eb194 > entry point at 0x200120 > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.8-current (RAMDISK_CD) #0: Mon Aug 30 20:55:54 JST 2010 > r...@i386_dev.my.domain:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 201 MHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX > real mem = 167276544 (159MB) > avail mem = 157675520 (150MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 07/15/95, BIOS32 rev. 0 @ 0xfdb80 > apminfo: 30102, code f0000[ffff]/f0000[ffff], data 400[bff], ept ef50 > apm0 at bios0: flags 30102 code 32:f0000/d08d8000[ffff] > 16:f0000/d08d8000[ffff] data 400/d4c0a400/bff ep ef50 (38:d08e6f50) > apm0: Power Management spec V1.2 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf61c0/96 (4 entries) > pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 ISA and IDE" rev > 0x00) > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xc000 > cpu0 at mainbus0: (uniprocessor) > cpu0: F00F bug workaround installed > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01 > vga1 at pci0 dev 2 function 0 "Neomagic Magicgraph NM2160" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > cbb0 at pci0 dev 3 function 0 "TI PCI1131 CardBus" rev 0x01: irq 11 > cbb1 at pci0 dev 3 function 1 "TI PCI1131 CardBus" rev 0x01: irq 11 > pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01 > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <HTS424040M9AT00> > wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 3 > "Intel 82371AB Power" rev 0x01 at pci0 dev 7 function 3 not configured > "AT&T/Lucent K56flex DSVD LTMODEM" rev 0x00 at pci0 dev 11 function 0 > not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x20 > pcmcia1 at cardslot1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > isapnp0 at isa0 port 0x279: read port 0x283 > "ESS ES1869 Plug and Play AudioD, ESS0006, , " at isapnp0 port 0x800/8 > not configured > "ESS ES1869 Plug and Play AudioD, ESS1869, , " at isapnp0 port > 0x220/16,0x388/4,0x330/2 irq 5 drq 1,0 not configured > "ESS ES1869 Plug and Play AudioD, ESS0001, , " at isapnp0 port 0x201/1 > not configured > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > biomask ffcd netmask ffcd ttymask ffff > rd0: fixed, 3800 blocks > wi0 at pcmcia0 function 0 "BUFFALO, WLI-PCM-L11G, Version 01.01" port > 0xa000/64 > wi0: Firmware 6.16 variant 1, address <...> > softraid0 at root > root on rd0a swap on rd0b dump on rd0b > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > > Welcome to the OpenBSD/i386 4.8 installation program. > (I)nstall, (U)pgrade or (S)hell? > > > ---------- > snapshot bsd.rd still reboots after rd0: > > boot> boot /bsd.rd.current > booting hd0a:/bsd.rd.current: 5869116+942776 [61+224832+212939]=0x6ea0dc > entry point at 0x200120 > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.8 (RAMDISK_CD) #88: Wed Aug 11 10:26:02 MDT 2010 > [email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 201 MHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX > real mem = 167276544 (159MB) > avail mem = 157679616 (150MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 07/15/95, BIOS32 rev. 0 @ 0xfdb80 > apm0 at bios0: Power Management spec V1.2 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf61c0/96 (4 entries) > pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 ISA and IDE" rev > 0x00) > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xc000 > cpu0 at mainbus0: (uniprocessor) > cpu0: F00F bug workaround installed > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01 > vga1 at pci0 dev 2 function 0 "Neomagic Magicgraph NM2160" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > cbb0 at pci0 dev 3 function 0 "TI PCI1131 CardBus" rev 0x01: irq 11 > cbb1 at pci0 dev 3 function 1 "TI PCI1131 CardBus" rev 0x01: irq 11 > pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01 > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <HTS424040M9AT00> > wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 3 > "Intel 82371AB Power" rev 0x01 at pci0 dev 7 function 3 not configured > "AT&T/Lucent K56flex DSVD LTMODEM" rev 0x00 at pci0 dev 11 function 0 > not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x20 > pcmcia1 at cardslot1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > isapnp0 at isa0 port 0x279: read port 0x283 > "ESS ES1869 Plug and Play AudioD, ESS0006, , " at isapnp0 port 0x800/8 > not configured > "ESS ES1869 Plug and Play AudioD, ESS1869, , " at isapnp0 port > 0x220/16,0x388/4,0x330/2 irq 5 drq 1,0 not configured > "ESS ES1869 Plug and Play AudioD, ESS0001, , " at isapnp0 port 0x201/1 > not configured > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > biomask ffcd netmask ffcd ttymask ffff > rd0: fixed, 3800 blocks > > > > openbsd user
