Hello,
I'm running current with an ATI Readon X300. I used to use X11 in
multihead but for some reason it doesn't work anymore and at some
point it broke after updating.
I'm running multihead like this from my xinitrc:
xrandr --output DVI-0 --left-of DVI-1 &
and have the following section in Xorg.conf:
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1200"
Virtual 3840 1200
EndSubSection
This config used to work in the past.
Thank you very much for helping.
Kind regards,
Didier
Here is my dmesg and Xorg.conf
OpenBSD 4.8 (GENERIC.MP) #334: Wed Aug 11 10:14:41 MDT 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3200811008 (3052MB)
avail mem = 3101786112 (2958MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2d00 (38 entries)
bios0: vendor Intel Corp. version "CO96510J.86A.6070.2008.0413.2329"
date 04/13/2008
bios0: PRIMINFO UNLOCK INSTALL
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT TCPA
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4)
PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4)
UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3)
UHC5(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz, 1865.02 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 269MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz, 1883.45 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P32_)
acpiprt2 at acpi0: bus 2 (PEX0)
acpiprt3 at acpi0: bus 3 (PEX1)
acpiprt4 at acpi0: bus 4 (PEX2)
acpiprt5 at acpi0: bus 5 (PEX3)
acpiprt6 at acpi0: bus 6 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: SLPB
cpu0: Enhanced SpeedStep 1883 MHz: speeds: 1862, 1596 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82Q965 PCIE" rev 0x02: apic 2 int
16 (irq 255)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at radeondrm0
"ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
"Intel 82Q965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q965 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 18 (irq 9) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q965 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP AMT" rev 0x02: apic 2
int 20 (irq 11), address 00:19:d1:69:cb:c1
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2
int 16 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2
int 21 (irq 9)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2
int 18 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02:
apic 2 int 22 (irq 10)
azalia0: codecs: Sigmatel STAC9227X
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2
int 17 (irq 255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2
int 16 (irq 255)
pci3 at ppb2 bus 3
pciide1 at pci3 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1
configured to native-PCI
pciide1: using apic 2 int 17 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS05> ATAPI
5/cdrom removable
atapiscsi1 at pciide1 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S182D, SB05> ATAPI
5/cdrom removable
pciide1: channel 1 ignored (not responding; disabled or no drives?)
ppb3 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: apic 2
int 18 (irq 255)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 2
int 19 (irq 255)
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2
int 17 (irq 255)
pci6 at ppb5 bus 6
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2
int 23 (irq 11)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2
int 19 (irq 11)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2
int 18 (irq 9)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2
int 23 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci7 at ppb6 bus 7
"TI TSB43AB22 FireWire" rev 0x00 at pci7 dev 3 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02
pciide2 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide2: using apic 2 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide2 channel 0 drive 0: <SAMSUNG HD321KJ>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic
2 int 21 (irq 9)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide3 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide3: using apic 2 int 19 (irq 11) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhub7 at uhub1 port 1 "Standard Microsystems product 0x2502" rev
2.00/0.01 addr 2
uhidev0 at uhub7 port 1 configuration 1 interface 0 "vendor 0x0f78
product 0x000f" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 1 configuration 1 interface 1 "vendor 0x0f78
product 0x000f" rev 1.10/1.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub7 port 1 configuration 1 interface 2 "vendor 0x0f78
product 0x000f" rev 1.10/1.00 addr 3
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhub8 at uhub7 port 2 "Standard Microsystems product 0x2502" rev
2.00/0.01 addr 4
ugen0 at uhub2 port 1 "Gemplus USB SmartCard Reader" rev 1.10/1.00 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
#RgbPath "/usr/X11R6/share/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/local/lib/X11/fonts/Liberation"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 520 320 # mm
Identifier "Monitor0"
VendorName "BNQ"
ModelName "BenQ G2400W"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 31.0 - 94.0
VertRefresh 50.0 - 85.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" "true" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" "HIGH" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" "true" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV370 5B60 [Radeon X300 (PCIE)]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
#Modes "1440x900"
#Virtual 2880 900
#Modes "1680x1050"
#Virtual 3360 1050
Modes "1920x1200"
Virtual 3840 1200
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
#Modes "1440x900"
#Virtual 2880 900
#Modes "1680x1050"
#Virtual 3360 1050
Modes "1920x1200"
Virtual 3840 1200
EndSubSection
EndSection
