This is mpi so this response doesn't seem accurate as they don't have battery cache etc.
On Tue, Aug 31, 2010 at 08:30:53PM +0200, Ivan Nudzik wrote: > Download "Smart Start" CD from HP site. Boot this CD and configure SCSI > adapter an RAID settings. There is far more options to configure, than > from SCSI adapter BIOS. Btw if you have battery backed cache, you can > switch on write cache. You should also download and boot "Firmware > CD"... > > I. > > On Tue, 2010-08-31 at 18:52 +0300, Evgeniy Sudyr wrote: > > > I have troubles with on OpenBSD 4.7 with HP DL 120 G5 > > > > Actually I'm trying to unpack src.tar.gz and see that it's very slow. > > > > There is my systat during unpacking and dmesg for the server > > > > systat > > > > 2 users Load 2.77 2.48 2.17 Tue Aug 31 19:46:02 > > 2010 > > > > memory totals (in KB) PAGING SWAPPING > > Interrupts > > real virtual free in out in out 568 > > total > > Active 13212 13212 3281736 ops 400 > > clock > > All 410024 410024 7342468 pages 79 ipi > > 88 mpi0 > > Proc:r d s w Csw Trp Sys Int Sof Flt forks 1 em0 > > 2 6 164 1 258 89 100 9 fkppw > > uhci3 > > fksvm > > ehci1 > > 0.0%Int 0.1%Sys 0.2%Usr 0.0%Nic 99.7%Idle pwait > > | | | | | | | | | | | relck > > rlkok > > noram > > Namei Sys-cache Proc-cache No-cache ndcpy > > Calls hits % hits % miss % fltcp > > 881 742 84 4 0 135 15 zfod > > cow > > Disks sd0 30764 fmin > > seeks 41018 ftarg > > xfers 88 itarg > > speed 761K 49 wired > > sec 1.0 pdfre > > pdscn > > pzidle > > 15 kmapent > > > > dmesg > > > > OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 3889758208 (3709MB) > > avail mem = 3780005888 (3604MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdc010 (43 entries) > > bios0: vendor HP version "O22" date 10/09/2009 > > bios0: HP ProLiant DL120 G5 > > acpi0 at bios0: rev 2 > > acpi0: tables DSDT FACP SPMI EINJ HEST BERT SSDT ERST MCFG APIC BOOT > > SPCR SSDT SSDT SSDT > > acpi0: wakeup devices USB4(S3) USB5(S3) USB7(S3) ESB2(S4) EXP1(S4) > > EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EXP6(S4) USB1(S3) USB2(S3) > > USB3(S3) USB6(S3) ESB1(S3) PCIB(S3) PWRB(S3) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.65 MHz > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > > cpu0: 4MB 64b/line 16-way L2 cache > > cpu0: apic clock running at 266MHz > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > > cpu1: 4MB 64b/line 16-way L2 cache > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > > cpu2: 4MB 64b/line 16-way L2 cache > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > > cpu3: 4MB 64b/line 16-way L2 cache > > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (PEG1) > > acpiprt2 at acpi0: bus -1 (PEG2) > > acpiprt3 at acpi0: bus 5 (EXP1) > > acpiprt4 at acpi0: bus -1 (EXP2) > > acpiprt5 at acpi0: bus -1 (EXP3) > > acpiprt6 at acpi0: bus -1 (EXP4) > > acpiprt7 at acpi0: bus 13 (EXP5) > > acpiprt8 at acpi0: bus 14 (EXP6) > > acpiprt9 at acpi0: bus 17 (PCIB) > > acpicpu0 at acpi0: C3, PSS > > acpicpu1 at acpi0: C3, PSS > > acpicpu2 at acpi0: C3, PSS > > acpicpu3 at acpi0: C3, PSS > > acpibtn0 at acpi0: PWRB > > ipmi at mainbus0 not configured > > cpu0: Enhanced SpeedStep 2133 MHz: speeds: 2133, 1600 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x01 > > ppb0 at pci0 dev 1 function 0 "Intel 3200/3210 PCIE" rev 0x01: apic 4 > > int 16 (irq 5) > > pci1 at ppb0 bus 1 > > mpi0 at pci1 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic > > 4 int 16 (irq 5) > > scsibus0 at mpi0: 112 targets > > sd0 at scsibus0 targ 1 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 > > 0/direct fixed > > sd0: 237464MB, 512 bytes/sec, 486326272 sec total > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 > > int 16 (irq 5) > > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 > > int 17 (irq 10) > > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 > > int 18 (irq 3) > > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 > > int 18 (irq 3) > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 > > int 16 (irq 5) > > pci2 at ppb1 bus 5 > > em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06: > > apic 4 int 16 (irq 5), address 00:18:71:ec:02:9d > > ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 > > int 16 (irq 5) > > pci3 at ppb2 bus 13 > > vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4 > > int 17 (irq 10) > > pci4 at ppb3 bus 14 > > bge0 at pci4 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0 > > (0xa200): apic 4 int 17 (irq 10), address 00:23:7d:aa:06:61 > > brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0 > > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 > > int 16 (irq 5) > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 > > int 17 (irq 10) > > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 > > int 18 (irq 3) > > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 > > int 16 (irq 5) > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > > pci5 at ppb4 bus 17 > > pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02 > > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, > > channel 0 configured to native-PCI, channel 1 configured to native-PCI > > pciide0: using apic 4 int 17 (irq 10) for native-PCI interrupt > > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic > > 4 int 17 (irq 10) > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM ECC PC2-6400CL5 > > spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM ECC PC2-6400CL5 > > spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM ECC PC2-6400CL5 > > spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM ECC PC2-6400CL5 > > pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, > > channel 0 wired to native-PCI, channel 1 wired to native-PCI > > pciide1: using apic 4 int 18 (irq 3) for native-PCI interrupt > > usb2 at uhci0: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci1: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb7 at uhci5: USB revision 1.0 > > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pcppi0 at isa0 port 0x61 > > midi0 at pcppi0: <PC speaker> > > spkr0 at pcppi0 > > mtrr: Pentium Pro MTRR support > > uhidev0 at uhub5 port 2 configuration 1 interface 0 "ServerEngines SE > > USB Device" rev 1.10/0.01 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > > uhidev1 at uhub5 port 2 configuration 1 interface 1 "ServerEngines SE > > USB Device" rev 1.10/0.01 addr 2 > > uhidev1: iclass 3/1 > > ums0 at uhidev1: 8 buttons, Z dir > > wsmouse0 at ums0 mux 0 > > vscsi0 at root > > scsibus1 at vscsi0: 256 targets > > softraid0 at root > > root on sd0a swap on sd0b dump on sd0b > > > > > > # dd if=/dev/zero of=/tmp/tmp bs=1 count=10000000 > > 10000000+0 records in > > 10000000+0 records out > > 10000000 bytes transferred in 14.213 secs (703548 bytes/sec) > > > > > > I tried to disable acpi, but that not helped. Results are same. > > > > This is about driver problems or something else ? > > > > -- > > With regards, > > Eugene Sudyr
