Matthew Dempsky <[email protected]> wrote:
>
> Some more details would be helpful. E.g., at least a dmesg from your
> working 4.7 install, and if you could transcribe at least the last few
> lines of dmesg output from booting install48.iso (e.g., did it panic
> or just hang?) that would go a long way.
My 4.7 dmesg:
OpenBSD 4.7-stable (GENERIC.MP) #0: Thu Jul 22 09:31:34 MSD 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1060163584 (1011MB)
avail mem = 1018466304 (971MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @ 0xe90b0 (31
entries)
bios0: vendor Acer version "v0.3110" date 10/06/2008
bios0: Acer AO531h
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus 2 (EXP3)
acpiprt5 at acpi0: bus 3 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 95 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: OVGA
acpivout0 at acpivideo0: CRT1
acpivout1 at acpivideo0: DTV1
acpivout2 at acpivideo0: DFP1
acpivout3 at acpivideo0: LCD_
acpivout4 at acpivideo0: DTV2
acpivout5 at acpivideo0: DFP2
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1600, 1333, 1066, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x40000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 int
16 (irq 11)
azalia0: codecs: Realtek ALC272
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
(irq 255)
pci1 at ppb0 bus 1
ale0 at pci1 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: AR8113, apic
4 int 16 (irq 11), address 00:26:9e:00:53:d1
atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18
(irq 255)
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5150" rev 0x00: apic 4 int 18
(irq 11), MIMO 1T2R, ABG, address 00:16:eb:0e:7d:62
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19
(irq 255)
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 4 int 17
(irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9160310AS, 0303> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 1 configuration 1 interface 0 "Sonix Technology Co., Ltd.
WebCam" rev 2.00/1.00 addr 2
video0 at uvideo0
umass0 at uhub0 port 3 configuration 1 interface 0 "Cypress Semiconductor
USB2.0 Storage Device" rev 2.00/0.01 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PR03> SCSI0 5/cdrom
removable
uhub0: port 7, set config at addr 4 failed
uhub0: device problem, disabling port 7
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
install48.iso hangs after the line:
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PR03> SCSI0 5/cdrom
removable
Which is a USB CD drive containing the installation medium. The same drive was
used for 4.7 install.
Actually, the following lines in my 4.7 dmesg (the first lines not present in
install4.8.iso dmesg) refer to some device I can't identify for sure, but I
believe it's a built-in bluetooth device:
uhub0: port 7, set config at addr 4 failed
uhub0: device problem, disabling port 7
--
Dmitrij D. Czarkoff
