That looks like a hardware driver issue. oga any insight?
On Tue, Nov 02, 2010 at 06:22:43PM +0200, Gregory Edigarov wrote: > > well, it seems like it was xorg.conf. > > after running X -configure and reinstalling the config - problem seems > to have wanished. > > will observe the behaviour, though... > > On Tue, 2 Nov 2010 17:36:08 +0200 > Gregory Edigarov <[email protected]> wrote: > > > Hello, > > > > not sure about fvwm yet, but it seems like scrotwm can't work > > correctly: > > > > inteldrm0: gpu hung! > > no reset function for chipset. > > error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle > > hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed to > > idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl] *ERROR* > > Reenabling wedged hardware, good luck inteldrm0: gpu hung! > > no reset function for chipset. > > > > > > under fvwm system seems to workOpenBSD 4.8 (GENERIC) #136: Mon Aug 16 > > 09:06:23 MDT 2010 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: > > Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz > > cpu0: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > > real mem = 527986688 (503MB) avail mem = 509390848 (485MB) mainbus0 > > at root bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 > > @ 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) bios0: vendor > > American Megatrends Inc. version "P2.60" date 12/17/2003 acpi at > > bios0 function 0x0 not configured mpbios0 at bios0: Intel MP > > Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: apic clock running at 99MHz > > mpbios0: bus 0 is type PCI > > mpbios0: bus 1 is type PCI > > mpbios0: bus 2 is type PCI > > mpbios0: bus 3 is type PCI > > mpbios0: bus 4 is type ISA > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries) > > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev > > 0x00) pcibios0: PCI bus #3 is the last bus > > bios0: ROM list: 0xc0000/0xb400 > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03 > > vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > intagp0 at vga1 > > agp0 at intagp0: aperture at 0xd0000000, size 0x8000000 > > inteldrm0 at vga1: apic 2 int 16 (irq 11) > > drm0 at inteldrm0 > > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 > > int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" > > rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2 > > "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12) ehci0 at pci0 > > dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq > > 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root > > hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel > > 82801BA Hub-to-PCI" rev 0x82 pci1 at ppb0 bus 3 > > rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19 > > (irq 5), address 00:30:4f:23:15:f0 rlphy0 at rl0 phy 0: RTL internal > > PHY rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int > > 17 (irq 3), address 00:0b:6a:f8:3e:e3 rlphy1 at rl1 phy 0: RTL > > internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" > > rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 > > "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to > > compatibility, channel 1 configured to compatibility wd0 at pciide0 > > channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48, > > 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4, > > Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at > > atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW > > AD-7170A, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO > > mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 31 function 5 "Intel > > 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97 ac97: codec > > id 0x434d4961 (C-Media Electronics CMI9739) audio0 at auich0 > > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb2 at uhci1: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci2: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at ichpcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > lpt0 at isa0 port 0x378/4 irq 7 > > wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17 > > lm1 at wbsio0 port 0x290/8: W83627HF > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > > mtrr: Pentium Pro MTRR support > > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech > > USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2 uhidev0: iclass 3/1 > > ums0 at uhidev0: 3 buttons, Z dir > > wsmouse0 at ums0 mux 0 > > softraid0 at root > > root on wd0a swap on wd0b dump on wd0b > > WARNING: / was not properly unmounted > > inteldrm0: gpu hung! > > no reset function for chipset. > > error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle > > hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed > > to idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl] > > *ERROR* Reenabling wedged hardware, good luck inteldrm0: gpu hung! > > no reset function for chipset. > > OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > > cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz > > cpu0: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > > real mem = 527986688 (503MB) avail mem = 509390848 (485MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @ > > 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) bios0: vendor > > American Megatrends Inc. version "P2.60" date 12/17/2003 acpi at > > bios0 function 0x0 not configured mpbios0 at bios0: Intel MP > > Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: apic clock running at 99MHz > > mpbios0: bus 0 is type PCI > > mpbios0: bus 1 is type PCI > > mpbios0: bus 2 is type PCI > > mpbios0: bus 3 is type PCI > > mpbios0: bus 4 is type ISA > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries) > > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev > > 0x00) pcibios0: PCI bus #3 is the last bus > > bios0: ROM list: 0xc0000/0xb400 > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03 > > vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > intagp0 at vga1 > > agp0 at intagp0: aperture at 0xd0000000, size 0x8000000 > > inteldrm0 at vga1: apic 2 int 16 (irq 11) > > drm0 at inteldrm0 > > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 > > int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" > > rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2 > > "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12) ehci0 at pci0 > > dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq > > 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root > > hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel > > 82801BA Hub-to-PCI" rev 0x82 pci1 at ppb0 bus 3 > > rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19 > > (irq 5), address 00:30:4f:23:15:f0 rlphy0 at rl0 phy 0: RTL internal > > PHY rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int > > 17 (irq 3), address 00:0b:6a:f8:3e:e3 rlphy1 at rl1 phy 0: RTL > > internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" > > rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 > > "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to > > compatibility, channel 1 configured to compatibility wd0 at pciide0 > > channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48, > > 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4, > > Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at > > atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW > > AD-7170A, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO > > mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 31 function 5 "Intel > > 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97 ac97: codec > > id 0x434d4961 (C-Media Electronics CMI9739) audio0 at auich0 > > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb2 at uhci1: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci2: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at ichpcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > lpt0 at isa0 port 0x378/4 irq 7 > > wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17 > > lm1 at wbsio0 port 0x290/8: W83627HF > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > > mtrr: Pentium Pro MTRR support > > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech > > USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2 uhidev0: iclass 3/1 > > ums0 at uhidev0: 3 buttons, Z dir > > wsmouse0 at ums0 mux 0 > > softraid0 at root > > root on wd0a swap on wd0b dump on wd0b > > WARNING: / was not properly unmounted > > fine, so I suspect something is broken > > in the way scrotwm works. > > > > full dmesg follows: > > > > > > > -- > With best regards, > Gregory Edigarov
