The problem Occurred after I put up 4.8.
So far it has happened three times.
It occurs when I switch to console 1 then switched back to X, not every time
though
dmesg
usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
cmpci0 at pci1 dev 3 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev
0x10: apic 2 int 21 (irq 9)
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82801DB LAN" rev 0x81, i82562: apic 2 int
20 (irq 9), address 00:e0:18:7e:3b:7e
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ppb1 at pci1 dev 9 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
ste0 at pci2 dev 4 function 0 "D-Link 550TX" rev 0x14: apic 2 int 21 (irq 9),
address 00:05:5d:6d:a9:d2
ukphy0 at ste0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste1 at pci2 dev 5 function 0 "D-Link 550TX" rev 0x14: apic 2 int 22 (irq 9),
address 00:05:5d:6d:a9:d3
ukphy1 at ste1 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste2 at pci2 dev 6 function 0 "D-Link 550TX" rev 0x14: apic 2 int 23 (irq 9),
address 00:05:5d:6d:a9:d4
ukphy2 at ste2 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste3 at pci2 dev 7 function 0 "D-Link 550TX" rev 0x14: apic 2 int 20 (irq 9),
address 00:05:5d:6d:a9:d5
ukphy3 at ste3 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ppb2 at pci1 dev 13 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
ste4 at pci3 dev 4 function 0 "D-Link 550TX" rev 0x14: apic 2 int 21 (irq 9),
address 00:05:5d:6d:a9:e6
ukphy4 at ste4 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste5 at pci3 dev 5 function 0 "D-Link 550TX" rev 0x14: apic 2 int 22 (irq 9),
address 00:05:5d:6d:a9:e7
ukphy5 at ste5 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste6 at pci3 dev 6 function 0 "D-Link 550TX" rev 0x14: apic 2 int 23 (irq 9),
address 00:05:5d:6d:a9:e8
ukphy6 at ste6 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste7 at pci3 dev 7 function 0 "D-Link 550TX" rev 0x14: apic 2 int 20 (irq 9),
address 00:05:5d:6d:a9:e9
ukphy7 at ste7 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00ETA0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD200BB-32CXA0>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1212, 1022> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
syncing disks... done
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 1.70GHz ("GenuineIntel" 686-class) 1.69 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 528027648 (503MB)
avail mem = 509431808 (485MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/15/02, BIOS32 rev. 0 @ 0xf1e60,
SMBIOS rev. 2.3 @ 0xf0040 (48 entries)
bios0: vendor Award Software, Inc. version "ASUS P4B533-V ACPI BIOS Revision
1002" date 05/15/2002
bios0: ASUSTeK Computer INC. P4B533-V
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP BOOT APIC
acpi0: wakeup devices PCI1(S4) PCI2(S4) UAR1(S4) USB0(S4) USB1(S4) USB2(S4)
US20(S4) AC97(S4) PCI0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PCI1)
acpiprt2 at acpi0: bus 1 (PCI2)
acpicpu0 at acpi0: C2
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xae00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf0000000, size 0x8000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: apic 2 int 16
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: apic 2 int 19
(irq 9)
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: apic 2 int 18
(irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: apic 2 int 23
(irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
cmpci0 at pci1 dev 3 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev
0x10: apic 2 int 21 (irq 9)
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82801DB LAN" rev 0x81, i82562: apic 2 int
20 (irq 9), address 00:e0:18:7e:3b:7e
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ppb1 at pci1 dev 9 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
ste0 at pci2 dev 4 function 0 "D-Link 550TX" rev 0x14: apic 2 int 21 (irq 9),
address 00:05:5d:6d:a9:d2
ukphy0 at ste0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste1 at pci2 dev 5 function 0 "D-Link 550TX" rev 0x14: apic 2 int 22 (irq 9),
address 00:05:5d:6d:a9:d3
ukphy1 at ste1 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste2 at pci2 dev 6 function 0 "D-Link 550TX" rev 0x14: apic 2 int 23 (irq 9),
address 00:05:5d:6d:a9:d4
ukphy2 at ste2 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste3 at pci2 dev 7 function 0 "D-Link 550TX" rev 0x14: apic 2 int 20 (irq 9),
address 00:05:5d:6d:a9:d5
ukphy3 at ste3 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ppb2 at pci1 dev 13 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
ste4 at pci3 dev 4 function 0 "D-Link 550TX" rev 0x14: apic 2 int 21 (irq 9),
address 00:05:5d:6d:a9:e6
ukphy4 at ste4 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste5 at pci3 dev 5 function 0 "D-Link 550TX" rev 0x14: apic 2 int 22 (irq 9),
address 00:05:5d:6d:a9:e7
ukphy5 at ste5 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste6 at pci3 dev 6 function 0 "D-Link 550TX" rev 0x14: apic 2 int 23 (irq 9),
address 00:05:5d:6d:a9:e8
ukphy6 at ste6 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste7 at pci3 dev 7 function 0 "D-Link 550TX" rev 0x14: apic 2 int 20 (irq 9),
address 00:05:5d:6d:a9:e9
ukphy7 at ste7 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00ETA0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD200BB-32CXA0>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1212, 1022> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
syncing disks... done
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 1.70GHz ("GenuineIntel" 686-class) 1.69 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 528027648 (503MB)
avail mem = 509431808 (485MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/15/02, BIOS32 rev. 0 @ 0xf1e60,
SMBIOS rev. 2.3 @ 0xf0040 (48 entries)
bios0: vendor Award Software, Inc. version "ASUS P4B533-V ACPI BIOS Revision
1002" date 05/15/2002
bios0: ASUSTeK Computer INC. P4B533-V
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP BOOT APIC
acpi0: wakeup devices PCI1(S4) PCI2(S4) UAR1(S4) USB0(S4) USB1(S4) USB2(S4)
US20(S4) AC97(S4) PCI0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PCI1)
acpiprt2 at acpi0: bus 1 (PCI2)
acpicpu0 at acpi0: C2
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xae00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf0000000, size 0x8000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: apic 2 int 16
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: apic 2 int 19
(irq 9)
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: apic 2 int 18
(irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: apic 2 int 23
(irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
cmpci0 at pci1 dev 3 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev
0x10: apic 2 int 21 (irq 9)
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82801DB LAN" rev 0x81, i82562: apic 2 int
20 (irq 9), address 00:e0:18:7e:3b:7e
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ppb1 at pci1 dev 9 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
ste0 at pci2 dev 4 function 0 "D-Link 550TX" rev 0x14: apic 2 int 21 (irq 9),
address 00:05:5d:6d:a9:d2
ukphy0 at ste0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste1 at pci2 dev 5 function 0 "D-Link 550TX" rev 0x14: apic 2 int 22 (irq 9),
address 00:05:5d:6d:a9:d3
ukphy1 at ste1 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste2 at pci2 dev 6 function 0 "D-Link 550TX" rev 0x14: apic 2 int 23 (irq 9),
address 00:05:5d:6d:a9:d4
ukphy2 at ste2 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste3 at pci2 dev 7 function 0 "D-Link 550TX" rev 0x14: apic 2 int 20 (irq 9),
address 00:05:5d:6d:a9:d5
ukphy3 at ste3 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ppb2 at pci1 dev 13 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
ste4 at pci3 dev 4 function 0 "D-Link 550TX" rev 0x14: apic 2 int 21 (irq 9),
address 00:05:5d:6d:a9:e6
ukphy4 at ste4 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste5 at pci3 dev 5 function 0 "D-Link 550TX" rev 0x14: apic 2 int 22 (irq 9),
address 00:05:5d:6d:a9:e7
ukphy5 at ste5 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste6 at pci3 dev 6 function 0 "D-Link 550TX" rev 0x14: apic 2 int 23 (irq 9),
address 00:05:5d:6d:a9:e8
ukphy6 at ste6 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ste7 at pci3 dev 7 function 0 "D-Link 550TX" rev 0x14: apic 2 int 20 (irq 9),
address 00:05:5d:6d:a9:e9
ukphy7 at ste7 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0004
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00ETA0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD200BB-32CXA0>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1212, 1022> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
inteldrm0: gpu hung!
no reset function for chipset.
error: [drm:pid18624:inteldrm_lastclose] *ERROR* failed to idle hardware: 5
error: [drm:pid21773:inteldrm_lastclose] *ERROR* failed to idle hardware: 5
error: [drm:pid21773:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged
hardware, good luck
inteldrm0: gpu hung!
no reset function for chipset.
