I'm getting this when I: dd if=/dev/rsd2c of=/dev/null bs=1m; some disk:
ahci0: read NCQ error page, but not an NCQ error?
...
I first tried to mount_ntfs It, when it didn't worked I tried to dd' it.
Should I try to set any debugging flags or should I throw this disk to trash?
This is amd64 -current as Nov 22.
dmesg:
OpenBSD 4.8-current (kobj) #0: Mon Nov 22 20:58:47 CST 2010
[email protected]:/usr/kobj
real mem = 2011758592 (1918MB)
avail mem = 1944289280 (1854MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f400 (60 entries)
bios0: vendor American Megatrends Inc. version "080014" date 03/13/2009
bios0: FOXCONN A6VMX
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
PCE7(S4) SBAZ(S4) PS2K(S4) PS2M(S3) P0PC(S4) WOL_(S4) AC97(S4)
MC97(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) EUSB(S3)
PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) II X4 955 Processor, 800.18 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II X4 955 Processor, 800.04 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) II X4 955 Processor, 800.03 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Phenom(tm) II X4 955 Processor, 800.03 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus 2 (PCE5)
acpiprt6 at acpi0: bus 3 (P0PC)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon X1250" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E
(0x3400), apic 4 int 17 (irq 15), address 00:1f:e2:09:c2:ee
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 4 int
22 (irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AAJS-2, 01.0> SCSI3 0/direct fixed
sd0: 476940MB, 512 bytes/sec, 976773168 sec total
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD10EARS-00Y, 80.0> SCSI3 0/direct fixed
sd1: 953869MB, 512 bytes/sec, 1953525168 sec total
sd2 at scsibus0 targ 3 lun 0: <ATA, Maxtor 6L080M0, BACE> SCSI3 0/direct fixed
sd2: 78167MB, 512 bytes/sec, 160086528 sec total
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 4 int
16 (irq 5), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 4 int
17 (irq 15), version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 4 int
18 (irq 10), version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 4 int
17 (irq 15), version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 4 int
18 (irq 10), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 4 int
19 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x13: SMI
iic0 at piixpm0
iic0: addr 0x2f 01=33 02=30 03=33 04=30 05=33 06=33 07=33 08=33 09=38
0a=38 0b=ab 0c=98 11=70 12=40 5a=05 5b=10 5c=10 5d=19 5e=34 f0=20
f1=20 f2=02 fa=00 ff=5e words 00=ffff 01=33ff 02=30ff 03=33ff 04=30ff
05=33ff 06=33ff 07=33ff
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-116D, 1.08> ATAPI
5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic
4 int 16 (irq 5)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
ral0 at pci3 dev 0 function 0 "Ralink RT2561" rev 0x00: apic 4 int 20
(irq 10), address 00:80:5a:51:33:d4
ral0: MAC/BBP RT2561C, RF RT2527
re1 at pci3 dev 1 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
(0x1000), apic 4 int 21 (irq 9), address 00:08:54:a6:be:f6
rgephy0 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 15 bytes
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Microsoft Basic
Optical Mouse" rev 1.10/0.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 2 configuration 1 interface 0 "Logitech Logitech
USB Keyboard" rev 2.00/60.00 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub4 port 2 configuration 1 interface 1 "Logitech Logitech
USB Keyboard" rev 2.00/60.00 addr 2
uhidev2: iclass 3/0, 4 report ids
uhid0 at uhidev2 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev2 reportid 4: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
ahci0: read NCQ error page, but not an NCQ error?
ntfs_readattr_plain: ntfs_readntvattr_plain failed: o: 0, s: 160
ntfs_readattr_plain: attrib: 0 - 0
ahci0: read NCQ error page, but not an NCQ error?
ahci0: read NCQ error page, but not an NCQ error?
ahci0: read NCQ error page, but not an NCQ error?
