On Wed, Dec 08, 2010 at 01:42:27PM +0000, Jacob Meuser wrote: > On Wed, Dec 08, 2010 at 01:40:20PM +0000, Jacob Meuser wrote: > > mspdebug uses libusb, which means it uses ugen(4). > > > > ls -l /dev/ugen* > > oops, too quick. libusb also uses /dev/usb* to scan for devices. >
I just realized that I don't need the entire snapshot and could just download the kernel. With todays snapshot kernel from ftp.openbsd.org it attaches as ugen(4) and works. Sorry. (I actually tried this with several snapshots from mirrors since december 3rd before reporting.) > > On Wed, Dec 08, 2010 at 09:59:58AM +0100, Benjamin Nadland wrote: > > > I just got my TI MSP430 Launchpad and saw that msp430-gcc and > > > mspdebug got imported into ports. > > > >From the commit message: "One will need an upcoming umodem.c commit by > > > >jakemsr@, > > > and an upcoming mspdebug port in order to actually program the devices > > > though." > > > Is this the mentioned umodem.c commit: > > > http://marc.info/?l=openbsd-cvs&m=129125391912134&w=2 ? > > > > > > Compiling works(?) as expected. But when I try to upload the binary to > > > the chip, I get the following errors: > > > > > > $ mspdebug rf2500 > > > MSPDebug version 0.13 - debugging tool for MSP430 MCUs > > > Copyright (C) 2009, 2010 Daniel Beer <[email protected]> > > > This is free software; see the source for copying conditions. There is NO > > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > > > PURPOSE. > > > usbutil: unable to find a device matching 0451:f432 > > > > > > $ mspdebug rf2500 -U 0451:f432 > > > MSPDebug version 0.13 - debugging tool for MSP430 MCUs > > > Copyright (C) 2009, 2010 Daniel Beer <[email protected]> > > > This is free software; see the source for copying conditions. There is NO > > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > > > PURPOSE. > > > usbutil: unable to find 451:000 > > > > > > (might be unrelated, but why did it search for 451:000 ?) > > > > > > $ mspdebug rf2500 --usb-list > > > Devices on bus 000: > > > Devices on bus 000: > > > Devices on bus 000: > > > Devices on bus 000: > > > Devices on bus 000: > > > > > > So it doesn't find it, but it is plugged in and recognized: > > > > > > $ usbdevs -v > > > Controller /dev/usb0: > > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > > > Intel(0x8086), rev 1.00 > > > port 1 powered > > > port 2 powered > > > port 3 powered > > > port 4 powered > > > port 5 powered > > > port 6 powered > > > port 7 addr 3: high speed, power 100 mA, unconfigured, RTL8187B(0x8198), > > > Realtek(0x0bda), rev 2.00, iSerialNumber 00e04c000001 > > > port 8 powered > > > Controller /dev/usb1: > > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > > > Intel(0x8086), rev 1.00 > > > port 1 powered > > > port 2 powered > > > Controller /dev/usb2: > > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > > > Intel(0x8086), rev 1.00 > > > port 1 addr 2: full speed, power 100 mA, config 1, Texas Instruments > > > MSP-FET430UIF(0xf432), Texas Instruments(0x0451), rev 1.00, iSerialNumber > > > A7FF41CE96103E46 > > > port 2 powered > > > Controller /dev/usb3: > > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > > > Intel(0x8086), rev 1.00 > > > port 1 powered > > > port 2 powered > > > Controller /dev/usb4: > > > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > > > Intel(0x8086), rev 1.00 > > > port 1 powered > > > port 2 powered > > > > > > In my dmesg it shows that the launchpad attaches as uhidev(4), does this > > > mean > > > that the kernel is to old and does not contain the usb_quirks.c commit > > > from > > > dec 1 to prevent this? > > > (http://marc.info/?l=openbsd-cvs&m=129127220327339&w=2) > > > (Just finished upgrading to this version a few hours ago, > > > currently downloading another, newer snapshot. Might take some time > > > though.) > > > > > > $ dmesg > > > OpenBSD 4.8-current (GENERIC) #510: Sat Dec 4 12:03:30 MST 2010 > > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > > > cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) > > > 1.60 GHz > > > cpu0: > > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE > > > real mem = 1060163584 (1011MB) > > > avail mem = 1032769536 (984MB) > > > mainbus0 at root > > > bios0 at mainbus0: AT/286+ BIOS, date 05/09/08, SMBIOS rev. 2.4 @ 0xe8e70 > > > (32 entries) > > > bios0: vendor Acer version "v0.3114" date 05/09/2008 > > > bios0: Acer AOA150 > > > acpi0 at bios0: rev 2 > > > acpi0: sleep states S0 S3 S4 S5 > > > acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT > > > acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) > > > ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0) > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > acpihpet0 at acpi0: 14318179 Hz > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > cpu0 at mainbus0: apid 0 (boot processor) > > > cpu0: apic clock running at 133MHz > > > cpu at mainbus0: not configured > > > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > > > ioapic0: misconfigured as apic 0, remapped to apid 4 > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > acpiprt1 at acpi0: bus 4 (P32_) > > > acpiprt2 at acpi0: bus 1 (EXP1) > > > acpiprt3 at acpi0: bus 2 (EXP2) > > > acpiprt4 at acpi0: bus -1 (EXP3) > > > acpiprt5 at acpi0: bus 3 (EXP4) > > > acpiec0 at acpi0 > > > acpicpu0 at acpi0: C3, C2, C1, PSS > > > acpibtn0 at acpi0: PWRB > > > acpibtn1 at acpi0: LID0 > > > acpibtn2 at acpi0: SLPB > > > acpibat0 at acpi0: BAT1 not present > > > acpiac0 at acpi0: AC unit online > > > acpivideo0 at acpi0: OVGA > > > acpivout0 at acpivideo0: CRT1 > > > acpivout1 at acpivideo0: DTV1 > > > acpivout2 at acpivideo0: DFP1 > > > acpivout3 at acpivideo0: LCD_ > > > acpivout4 at acpivideo0: DTV2 > > > acpivout5 at acpivideo0: DFP2 > > > bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 > > > cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz > > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > > pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 > > > vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 > > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > > intagp0 at vga1 > > > agp0 at intagp0: aperture at 0x40000000, size 0x10000000 > > > inteldrm0 at vga1: apic 4 int 16 (irq 11) > > > drm0 at inteldrm0 > > > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > > > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic > > > 4 int 16 (irq 11) > > > azalia0: codecs: Realtek ALC268 > > > audio0 at azalia0 > > > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int > > > 16 (irq 255) > > > pci1 at ppb0 bus 1 > > > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int > > > 17 (irq 255) > > > pci2 at ppb1 bus 2 > > > re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL > > > (0x2480), apic 4 int 17 (irq 11), address 00:1e:68:ab:b0:0b > > > rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 > > > ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int > > > 19 (irq 255) > > > pci3 at ppb2 bus 3 > > > "JMicron SD/MMC" rev 0x00 at pci3 dev 0 function 0 not configured > > > sdhc0 at pci3 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: > > > apic 4 int 19 (irq 11) > > > sdmmc0 at sdhc0 > > > "JMicron Memory Stick" rev 0x00 at pci3 dev 0 function 3 not configured > > > "JMicron xD" rev 0x00 at pci3 dev 0 function 4 not configured > > > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int > > > 16 (irq 11) > > > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int > > > 17 (irq 11) > > > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int > > > 18 (irq 11) > > > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int > > > 19 (irq 11) > > > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int > > > 16 (irq 11) > > > usb0 at ehci0: USB revision 2.0 > > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > > > pci4 at ppb3 bus 4 > > > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM > > > disabled > > > pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, > > > channel 0 wired to compatibility, channel 1 wired to compatibility > > > wd0 at pciide0 channel 0 drive 0: <ST9120817AS> > > > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > > > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 > > > int 17 (irq 11) > > > iic0 at ichiic0 > > > spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > > > usb1 at uhci0: USB revision 1.0 > > > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > > usb2 at uhci1: USB revision 1.0 > > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > > usb3 at uhci2: USB revision 1.0 > > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > > usb4 at uhci3: USB revision 1.0 > > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > > isa0 at ichpcib0 > > > isadma0 at isa0 > > > pckbc0 at isa0 port 0x60/5 > > > pckbd0 at pckbc0 (kbd slot) > > > pckbc0: using irq 1 for kbd slot > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > > pms0 at pckbc0 (aux slot) > > > pckbc0: using irq 12 for aux slot > > > wsmouse0 at pms0 mux 0 > > > pcppi0 at isa0 port 0x61 > > > spkr0 at pcppi0 > > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > > mtrr: Pentium Pro MTRR support > > > uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology > > > Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2 > > > video0 at uvideo0 > > > urtw0 at uhub0 port 7 "Realtek RTL8187B" rev 2.00/2.00 addr 3 > > > urtw0: RTL8187B rev E, address 00:24:d2:2f:6d:1d > > > vscsi0 at root > > > scsibus0 at vscsi0: 256 targets > > > softraid0 at root > > > root on wd0a swap on wd0b dump on wd0b > > > scsibus1 at softraid0: 1 targets > > > sd0 at scsibus1 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct > > > fixed > > > sd0: 86811MB, 512 bytes/sec, 177790828 sec total > > > umodem0 at uhub1 port 1 configuration 1 interface 0 "Texas Instruments > > > Texas Instruments MSP-FET430UIF" rev 1.10/1.00 addr 2 > > > umodem0: no pointer to data interface > > > uhidev0 at uhub1 port 1 configuration 1 interface 1 "Texas Instruments > > > Texas Instruments MSP-FET430UIF" rev 1.10/1.00 addr 2 > > > uhidev0: iclass 3/0, 211 report ids > > > uhid0 at uhidev0 reportid 1: input=1, output=1, feature=0 > > > uhid1 at uhidev0 reportid 2: input=2, output=2, feature=0 > > > uhid2 at uhidev0 reportid 3: input=3, output=3, feature=0 > > > uhid3 at uhidev0 reportid 4: input=4, output=4, feature=0 > > > uhid4 at uhidev0 reportid 5: input=5, output=5, feature=0 > > > uhid5 at uhidev0 reportid 6: input=6, output=6, feature=0 > > > uhid6 at uhidev0 reportid 7: input=7, output=7, feature=0 > > > uhid7 at uhidev0 reportid 8: input=8, output=8, feature=0 > > > uhid8 at uhidev0 reportid 9: input=9, output=9, feature=0 > > > uhid9 at uhidev0 reportid 10: input=10, output=10, feature=0 > > > uhid10 at uhidev0 reportid 11: input=11, output=11, feature=0 > > > uhid11 at uhidev0 reportid 12: input=12, output=12, feature=0 > > > uhid12 at uhidev0 reportid 13: input=13, output=13, feature=0 > > > uhid13 at uhidev0 reportid 14: input=14, output=14, feature=0 > > > uhid14 at uhidev0 reportid 15: input=15, output=15, feature=0 > > > uhid15 at uhidev0 reportid 16: input=16, output=16, feature=0 > > > uhid16 at uhidev0 reportid 17: input=17, output=17, feature=0 > > > uhid17 at uhidev0 reportid 18: input=18, output=18, feature=0 > > > uhid18 at uhidev0 reportid 32: input=32, output=32, feature=0 > > > uhid19 at uhidev0 reportid 63: input=63, output=63, feature=0 > > > uhid20 at uhidev0 reportid 200: input=0, output=0, feature=1 > > > uhid21 at uhidev0 reportid 201: input=0, output=0, feature=2 > > > uhid22 at uhidev0 reportid 202: input=0, output=0, feature=2 > > > uhid23 at uhidev0 reportid 203: input=0, output=0, feature=1 > > > uhid24 at uhidev0 reportid 204: input=0, output=0, feature=1 > > > uhid25 at uhidev0 reportid 205: input=0, output=0, feature=1 > > > uhid26 at uhidev0 reportid 210: input=0, output=0, feature=1 > > > uhid27 at uhidev0 reportid 211: input=0, output=0, feature=1 > > > > > > $ pkg_info | grep msp > > > msp430-binutils-2.20 GNU binutils for msp430 > > > msp430-gcc-4.4.4 GNU Compiler Collection for msp430 > > > msp430-gdb-7.1 GNU debugger for msp430 > > > msp430-libc-20101113 GNU libc for msp430 > > > mspdebug-0.13 debugger for use with MSP 430 MCUs > > > > -- > > [email protected] > > SDF Public Access UNIX System - http://sdf.lonestar.org > > -- > [email protected] > SDF Public Access UNIX System - http://sdf.lonestar.org
