On 12/31/2010 3:23 PM, Ted Unangst wrote:
On Fri, Dec 31, 2010 at 1:50 AM, Markus Bergkvist
<[email protected]> wrote:
I've been using some Compaq Deskpro DPENS Pentium II machines as
OpenBSD
firewalls since late 2.x to early 3.x. Recently I made the jump to
4.8 and
all
seems to work fine except I noticed the reboot command does not
appear to
work. The machine gets halted, screen blanks out, but that's as far
as it
goes. I re-installed 3.3 and confirmed the reboot works fine under
3.3.
Any tips/hints to help troubleshoot or resolve this problem would be
greatly
appreciated.
We wouldn't have to play guess the machine if you sent a dmesg, but my
first approach would be to disable some combination of acpi and apm.
Do you have powerdown=YES in /etc/rc.shutdown?
That has nothing to do with rebooting.
Here's the dmesg from my machine....
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 350 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR
real mem = 66678784 (63MB)
avail mem = 55726080 (53MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/29/98, BIOS32 rev. 0 @
0xec700, SMBIOS rev. 2.1 @ 0xf1146 (48 entries)
bios0: vendor Compaq version "686T5" date 06/29/98
bios0: Compaq Deskpro EN Series SFF
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5, can't enable ACPI
bios0: ROM list: 0xc0000/0x8000 0xe0000/0x8000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0x44000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 10 function 0 "Intel 8255x" rev 0x05, i82558: irq 11,
address 00:08:c7:81:20:fc
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
xl0 at pci0 dev 13 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq
11, address 00:60:97:cf:35:9b
nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
xl1 at pci0 dev 14 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq
11, address 00:60:08:b0:cc:d9
nsphy1 at xl1 phy 24: DP83840 10/100 PHY, rev. 1
piixpcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC26400R>
wd0: 16-sector PIO, LBA, 6149MB, 12594960 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CD-224E, 8.0J> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 20 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x4c: adm1021
spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl at sb0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask ef45 netmask ef45 ttymask ffdf
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
#
