When booting 4.9-beta/amd64 without a network cable plugged, I get a lot
of splassert failures.
After changing kern.splassert to 3 I was able to get the following trace
(get with dmesg after a reboot) :
OpenBSD 4.9-beta (GENERIC.MP) #786: Tue Jan 25 17:46:34 MST 2011
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1062797312 (1013MB)
avail mem = 1020477440 (973MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf0760 (31 entries)
bios0: vendor American Megatrends Inc. version "0904" date 08/12/2010
bios0: ASUSTeK Computer INC. 1005PX
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG ECDT OEMB HPET GSCI SSDT SLIC
acpi0: wakeup devices P0P1(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, 1666.71 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, 1666.48 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu1: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiec0 at acpi0acpiec _REG failed, broken BIOS
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P0P4)
acpiprt2 at acpi0: bus 2 (P0P5)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiprt4 at acpi0: bus 1 (P0P7)
acpiec at acpi0 not configured
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz at acpi0 not configured
acpibat at acpi0 not configured
acpiac at acpi0 not configured
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRTD
acpivout1 at acpivideo0: TVOD
acpivout2 at acpivideo0: LCDD
cpu0: Enhanced SpeedStep 1666 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 15)
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
22 (irq 4)
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
(irq 15)
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
(irq 10)
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR2427" rev 0x01: apic 2 int 17 (irq 10)
athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 48:5d:60:24:0f:2b
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 2 int 19
(irq 11)
pci3 at ppb2 bus 1
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: apic 2 int 19
(irq 11), address 20:cf:30:70:8f:31
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 7)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 15)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 5
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: apic 2 int 21
(irq 5), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0:<ATA, WDC WD2500BEVT-8, 01.0> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 21
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Azurewave USB2.0 UVC VGA
WebCam" rev 2.00/3.22 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
alc0: watchdog timeout (missed link)
splassert: assertwaitok: want -1 have 1
Starting stack trace...
splassert_fail() at splassert_fail+0x55
assertwaitok() at assertwaitok+0x1c
pool_get() at pool_get+0x95
m_gethdr() at m_gethdr+0x3e
alc_newbuf() at alc_newbuf+0x39
alc_init_rx_ring() at alc_init_rx_ring+0x80
alc_init() at alc_init+0x2d
if_slowtimo() at if_slowtimo+0x5c
softclock() at softclock+0x291
softintr_dispatch() at softintr_dispatch+0x5d
Xsoftclock() at Xsoftclock+0x2d
--- interrupt ---
end trace frame: 0x0, count: 246
0x8:
End of stack trace.
Stopped at Debugger+0x5: leave
ddb{0}> Debugger() at Debugger+0x5
assertwaitok() at assertwaitok+0x1c
pool_get() at pool_get+0x95
m_gethdr() at m_gethdr+0x3e
alc_newbuf() at alc_newbuf+0x39
alc_init_rx_ring() at alc_init_rx_ring+0x80
alc_init() at alc_init+0x2d
if_slowtimo() at if_slowtimo+0x5c
softclock() at softclock+0x291
softintr_dispatch() at softintr_dispatch+0x5d
Xsoftclock() at Xsoftclock+0
Moreover, the system reboot immediately when I unplug the network cable.
I am unable to drop into ddb or get a more precise message than
following (truncated) dmesg :
OpenBSD 4.9-beta (GENERIC.MP) #786: Tue Jan 25 17:46:34 MST 2011
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1062797312 (1013MB)
avail mem = 1020477440 (973MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf0760 (31 entries)
bios0: vendor American Megatrends Inc. version "0904" date 08/12/2010
bios0: ASUSTeK Computer INC. 1005PX
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG ECDT OEMB HPET GSCI SSDT SLIC
acpi0: wakeup devices P0P1(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, 1666.73 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, 1666.48 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu1: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiec0 at acpi0acpiec _REG failed, broken BIOS
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P0P4)
acpiprt2 at acpi0: bus 2 (P0P5)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiprt4 at acpi0: bus 1 (P0P7)
acpiec at acpi0 not configured
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz at acpi0 not configured
acpibat at acpi0 not configured
acpiac at acpi0 not configured
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRTD
acpivout1 at acpivideo0: TVOD
acpivout2 at acpivideo0: LCDD
cpu0: Enhanced SpeedStep 1666 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 15)
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
22 (irq 4)
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
(irq 15)
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
(irq 10)
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR2427" rev 0x01: apic 2 int 17 (irq 10)
athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 48:5d:60:24:0f:2b
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 2 int 19
(irq 11)
pci3 at ppb2 bus 1
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: apic 2 int 19
(irq 11), address 20:cf:30:70:8f:31
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 7)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 15)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 5
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: apic 2 int 21
(irq 5), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0:<ATA, WDC WD2500BEVT-8, 01.0> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 21
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Azurewave USB2.0 UVC VGA
WebCam" rev 2.00/3.22 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
alc0: could not disable RxQ/TxQ (0x00000008)!
alc0: could not disable Rx/Tx MAC(0x00000008)!
alc0: DMA read error! -- resetting
kernel: protection fault trap, code=0
Stopped at
