> On Mon, Feb 7, 2011 at 10:50 AM, Andre Ruppert <[email protected]>
> wrote:
>
> > No problems - except UMTS, but I don't need it...
>
> Can you provide the output of "usbdevs -dv"?
You're welcome ;-)
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 powered
port 2 addr 2: high speed, self powered, config 1, product 0xa005(0xa005),
Dell(0x413c), rev 50.18
uhub5
port 1 powered
port 2 addr 3: full speed, power 100 mA, config 1, Novatel Wireless HSDPA
Modem(0x8137), Novatel Wireless(0x413c), rev 0.00, iSerialNumber Novatel
Wireless HSDPA Modem
ugen0
port 3 addr 4: full speed, power 200 mA, config 1, product 0x7761(0x7761),
vendor 0x0b97(0x0b97), rev 1.10
uhub6
port 1 powered
port 2 addr 5: full speed, self powered, config 1, O2Micro CCID SC
Reader(0x7762), O2(0x0b97), rev 1.10
ugen1
port 3 powered
port 4 addr 6: full speed, self powered, config 1, Bluetooth(0x8103),
Dell(0x413c), rev 35.38
ubt0
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 addr 7: high speed, self powered, config 1, product 0x0058(0x0058),
Dell(0x413c), rev 10.00
uhub7
port 1 powered
port 2 addr 8: high speed, self powered, config 1, product 0x0058(0x0058),
Dell(0x413c), rev 10.00
uhub8
port 1 powered
port 2 addr 9: low speed, power 100 mA, config 1, USB Optical Mouse(0x4d22),
Primax Electronics(0x0461), rev 2.00
uhidev0
port 3 powered
port 4 powered
port 3 addr 10: high speed, self powered, config 1, A04(0x9001), Dell USB
Drive(0x413c), rev 2.00
umass0
port 4 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub1
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub2
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub3
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub4
port 1 powered
port 2 powered
> I think the umts minicard should work after my commit
> (see: http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/umsm.c)
Thank you, I'll give it a try next weekend...
Andre Ruppert
