Don't you have to nat your interface (/etc/pf.conf) within the jail to be
viewed externally??
On Tue, 7 Jan 2014, Gilles Chehade wrote:
Date: Tue, 7 Jan 2014 20:14:31 +0100
From: Gilles Chehade <[email protected]>
To: Martin Kropfinger <[email protected]>
Cc: [email protected]
Subject: Re: smtpd: socket: Protocol not supported on FreeBSD9.2
On Tue, Jan 07, 2014 at 08:03:35PM +0100, Martin Kropfinger wrote:
Am Tue, 7 Jan 2014 19:27:13 +0100
schrieb Gilles Chehade <[email protected]>:
On Tue, Jan 07, 2014 at 07:19:10PM +0100, Martin Kropfinger wrote:
Care to share your ifconfig output ?
This is the ifconfig output from within the jail. The host holds
five IPs on one interface distributing them to the jails. The jail
itself has only one IP. I hope it is ok for you that I changed the
output a bit (I changed ether, inet and broadcast).
# ifconfig
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether rr:ss:tt:uu:vv:ww
inet xxx.yyy.53.125 netmask 0xffffffe0 broadcast xxx.yyy.53.127
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
Can you try to replace "listen on localhost" with "listen on 0.0.0.0", I
suspect the ipfw0 interface is causing smtpd to fail listening
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=
Robert S. Sciuk http://www.controlq.com 259 Simcoe St. S.
Control-Q Research tel: 905.706.1354 Oshawa, Ont.
[email protected] Canada, L1H 4H3
--
You received this mail because you are subscribed to [email protected]
To unsubscribe, send a mail to: [email protected]
