Hi Bernhard, there is no 0.3.1-rc27. Could you please do "misdn show config 0" on the CLI and post the output here, also you could attach your syslog file, maybe i can learn something from it.
Regards, Christian Bernhard Schmidt wrote: >Hi, > >additional information: > > > >>my setup: Debian testing with vanilla kernel 2.6.18, mISDN and mISDNuser >>are checked out from CVS HEAD a few hours ago, Asterisk 1.2.12.1.dfsg-1 >>binary packages in Debian, the included chan_misdn is overwritten with >>chan_misdn 0.4.0-rc5 compiled from source. >> >>I have two zaphfc cards in the box, the first is running in TE PtMP mode >>and connected to the NTBA of my local telco, the second is currently idling >>(supposed to be NT PtMP at a later stage). >> >> > >Changing to chan_misdn 0.3.1-rc27 or 0.3.0 as well as using the second hfcpci >card (one of them was sharing its interrupt with my 3ware controller) did not >change the behaviour either. > >The hardware is a standard x86 P-III 933MHz on an Intel i810-based board. >Nothing special in it (two hfcpci, one dvb-s card, one 3ware RAID >controller). > >Regards, >Bernhard >_______________________________________________ >Misdn-asterisk mailing list >[email protected] >http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk > > > > _______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
