Hi, I have a HFC-2S Beronet Card with Asterisk 1.2.16, connected to a P2P ISDN line in Italy. After upgrading mISDN from 1.1.1 to 1.1.5, card doesn't work anymore. 'misdnportinfo' seems to recognize card:
Port 1: TE-mode BRI S/T interface line (for phone lines) -> Interface is Poin-To-Point. -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- Port 2: TE-mode BRI S/T interface line (for phone lines) -> Interface is Poin-To-Point. -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- mISDN_close: fid(3) isize(131072) inbuf(0x8533060) irp(0x8533060) iend(0x8533060) but during an incoming call I see: P[ 1] MGMT: SSTATUS: L1_ACTIVATED P[ 1] There is no free channel on port (1) P[ 1] --> !! lib: No free channel! P[ 1] handle_frm: handle_cr <0 prim:3f082 addr:42000103 P[ 1] NO BC FOR STACK P[ 0] Unhandled Message: prim 30582 len 145 from addr 42000103, dinfo 20003 on this port. Any help? -- Domenico Viggiani _______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
