as far as i know it's not possible to interconnect 2xb410P, because they use the PCM Bus for the Echocanceller, you can do that only with beroNet BNXS0 cards, so the pcm_slave setting makes no sense in the misdn-init.conf.
c. [EMAIL PROTECTED] wrote:
Hi. In some of our installations (oddly not all, but still same network provider) I'm getting stutter in the sound stream every two seconds or so (just under). I've tried to track this down to configuration but not been successful in spotting what the problem might be. Should I look for things like poll or dsp_poll values or does anyone have any suggestions that may help in pinning this? Btw, the setup is two B410P's in one machine, four ports in NT mode and four in TE mode. Feeding three ISDN BRI's into the system and three out again: PSTN <-> NT box <-> B410P port in TE mode <-> Asterisk <-> B410P port in NT mode <-> PBX Configuring this in /etc/misdn-init.conf like so (leaving out what I think is not really relevant to the discussion): ################################################ ... card=1,0x4,rxclock card=2,0x4,pcm_slave ... option=1,master_clock ... poll=128 dsp_options=0 ... ################################################ And in /etc/asteerisk/misdn.conf like so: ################################################ [general] ... echocancel=yes echotraining=no echocancelwhenbridged=no bridging=no ... ################################################ Thank you for your time and effort! Respectfully, Baldvin _______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
_______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
