Thanks for the reply!
I tried building project wise , when I started building ITK module I got
the following error.
>1>------ Build started: Project: ITKIOGDCM, Configuration: Debug x64 ------
1>1>Compiling...
1>1>itkGDCMImageIO.cxx
1>1>itkGDCMSeriesFileNames.cxx
1>1>C:\Ravindra\Siemens_MIT\Binary S
Build\ITK-src\Modules\IO\GDCM\include\itkGDCMSeriesFileNames.h(25) : fatal
error C1083: Cannot open include file: 'gdcmSerieHelper.h': No such file or
directory
1>1>..\..\..\..\..\ITK-src\Modules\IO\GDCM\src\itkGDCMImageIO.cxx(41) :
fatal error C1083: Cannot open include file: 'gdcmImageHelper.h': No such
file or directory
1>1>Build log was saved at "file://c:\Ravindra\Siemens_MIT\Binary S
Build\ITK-build\Modules\IO\GDCM\src\ITKIOGDCM.dir\Debug\BuildLog.htm"
1>1>ITKIOGDCM - 2 error(s), 0 warning(s)
1>2>------ Build started: Project: itkTestDriver, Configuration: Debug x64
------
1>2>Performing Pre-Link Event...
1>2>Linking...
1>2>LINK : fatal error LNK1104: cannot open file
'..\..\..\..\lib\Debug\ITKIOGDCM-4.3.lib'
1>2>Build log was saved at "file://c:\Ravindra\Siemens_MIT\Binary S
Build\ITK-build\Modules\Core\TestKernel\src\itkTestDriver.dir\Debug\BuildLog.htm"
1>2>itkTestDriver - 1 error(s), 0 warning(s)
1>========== Build: 0 succeeded, 2 failed, 200 up-to-date, 0 skipped
==========
1>Project : error PRJ0019: A tool returned an error code from "Performing
build step for 'ITK'"
1>Build log was saved at "file://c:\Ravindra\Siemens_MIT\Binary S
Build\ITK.dir\Debug\BuildLog.htm"
1>ITK - 4 error(s), 0 warning(s)
========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ==========
Any help?
--
Ravi
On Sat, Jun 15, 2013 at 10:52 PM, Sascha Zelzer <[email protected]
> wrote:
> Hi Ravi,
>
> Given the error message and amount of information, I have to largely guess
> what's going on.
>
> My first guess is that during your MITK super-build, the MITK-Configure
> project did not run successfully and hence the MITK-build/MITK.sln solution
> file was not generate. Somehow VS then did not stop the super-build process
> and tried to build the MITK, which it couldn't because MITK.sln was not
> generated.
>
> Try to build the "MITK-Configure" project contained in the
> MITK-superbuild.sln solution again (either just "Build" or "Project Only ->
> Rebuild") and send us the output.
>
> Best,
> Sascha
>
>
> On 06/15/2013 06:16 PM, ravindra patil wrote:
>
>> Hi,
>>
>> I am using VS 2008 and qt 4.7, I am getting following error when I do
>> super build .Could any one help me please .
>>
>> Deleting intermediate and output files for project 'MITK-build',
>> configuration 'Debug|x64'
>> 12>Microsoft (R) Visual Studio Version 9.0.21022.8.
>> 12>Copyright (C) Microsoft Corp. All rights reserved.
>> 12>The following files were specified on the command line:
>> 12> MITK.sln
>> 12>These files could not be found and will not be loaded.Project : error
>> PRJ0019: A tool returned an error code from
>> 12>Build log was saved at "file://c:\Ravindra\Siemens_**MIT\Binary Super
>> Build\MITK-build.dir\Debug\**BuildLog.htm"
>> 12>MITK-build - 1 error(s), 0 warning(s)
>> ========== Rebuild All: 9 succeeded, 3 failed, 0 skipped ==========
>>
>> --
>> Ravi
>>
>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
mitk-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mitk-users
