Hi Ashish,

4GB RAM is on the low side for doing a full superbuild in parallel. You could try to individually build the projects in the MITK-superbuild.sln solution file. Start with DCMTK, GDCM, CTK, ITK, VTK etc. (in that order) and finally build the MITK project.

Best,
Sascha

On 07/08/2013 06:25 AM, Ashish Singh wrote:
Dear Caspar, Stefan and Ingmar,

Thanks for replying. I was travelling and didn't get a chance to reply back to your emails.

Caspar, the answers to your questions are as follows:
1) I am using CMAKE 2.8.8, but I have tried CMAKE 2.8.11.1 also.
2) The only things I have added are the path to Qt and CMAKE INSTALL PREFIX at the time of MITK configuration using CMAKE. Apart from this it is pretty much a straight superbuild.
3) Yes I am using superbuild process for everything including ITK/VTK etc.

Stefan, What changes do I need to do in CMakelists.txt file(s) to remove the -MP flag? Also, my system configuration is:
Processor: Intel Core 2 Quad CPU Q9400 2.7GHz
RAM: 4GB

Ingmar, What system configuration do you have( processor, speed, RAM etc. ) on which you are able to build successfully?

I would really appreciate if you could help fix the issue.

Thanks,
Ashish


On Wed, Jul 3, 2013 at 5:39 PM, iwegner <[email protected] <mailto:[email protected]>> wrote:

    Hi,
    I am also using VC10 and could compile v2013.06.0 right away.

    Best,
    Ingmar
-- Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail
    gesendet.



    "Kislinskiy, Stefan" <[email protected]> schrieb:

        Hi Ashish,

        you can try to remove the –MP flag to disable multi-processor
        compiling. Maybe this will help. Additionally have a look at
        the performance tab of the task manager during compilation.
        Your RAM might be completely in use.

        Best,

        Stefan

        *Von:*Goch, Caspar Jonas [mailto:[email protected]
        <mailto:[email protected]>]
        *Gesendet:* Mittwoch, 3. Juli 2013 13:25
        *An:* 'Ashish Singh'; [email protected]
        <mailto:[email protected]>
        *Betreff:* Re: [mitk-users] MITK 2013.06 build issue

        Hi Ashish,

        I am probably the main person using Visual Studio 2010 for all
        tasks here and my setup is similar. Could you fill me in on a
        couple more questions?

        What CMake Version are you using?

        Are you doing a straight superbuild, without any changes in
        the CMake configuration?

        Are you using the superbuild process for everything (including
        ITK/VTK…)

        Best,

        Caspar

        *Von:*Ashish Singh [mailto:[email protected]]
        *Gesendet:* Mittwoch, 3. Juli 2013 12:04
        *An:* [email protected]
        <mailto:[email protected]>
        *Betreff:* [mitk-users] MITK 2013.06 build issue

        Hi,

        I am trying to build MITK. After the CMake step, when I build
        MITK-superbuild.sln from visual studio, the build freezes
        after some time (during ITK build ). Here is what I get during
        one such build freeze.
        ---
        1>  -- Check size of int
        1>  -- Check size of int - done
        1>  -- Check size of long
        1>  -- Check size of long - done
        1>  -- Check size of long long
        1>  -- Check size of long long - done
        1>  -- Check size of __int64
        1>  -- Check size of __int64 - done
        1>  -- Checking whether char is signed
        1>  -- Checking whether char is signed - yes
        1>  -- Checking whether C compiler has ptrdiff_t in stddef.h
        1>  -- Checking whether C compiler has ptrdiff_t in stddef.h - yes
        1>  -- Checking whether C compiler has ssize_t in unistd.h
        1>  -- Checking whether C compiler has ssize_t in unistd.h - no
        1>  -- Checking whether CXX compiler has setenv
        1>  -- Checking whether CXX compiler has setenv - no
        1>  -- Checking whether CXX compiler has unsetenv
        1>  -- Checking whether CXX compiler has unsetenv - no
        1>  -- Checking whether CXX compiler has environ in stdlib.h
        ----

        Nothing happens after this. I need to manually kill the
        MSBuild process from task manager and restart the build. After
        restarting the build, the freeze happens again but at a
        different point. This has happened more than 10 times now.

        My environment is:

        OS: Win 7 64 bit

        MITK version: 2013.06

        Visual Studio 2010

        I have tried building the previous version of MITK also (ie.
        version 2013.03.02 ). I get the same behavior with that also.

        Has anyone else faced this issue?
        Can anyone help me figure out and fix the problem here?

        Thanks,
        Ashish



------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:

Build for Windows Store.

http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
mitk-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mitk-users

Reply via email to