Thanks Matt, seems like this feature could be broken and we should investigate then. I just found a bug in our tracker [1] which sounds like it was never completely implemented? I'll check. I would recommend you guys to subscribe to the bug to stay in the loop.
[1] http://bugs.mitk.org/show_bug.cgi?id=18542 Best regards, Stefan ________________________________________ Von: Clarkson, Matt [m.clark...@ucl.ac.uk] Gesendet: Dienstag, 5. April 2016 10:02 An: Kislinskiy, Stefan Cc: MITK Betreff: Re: [mitk-users] Scene properties Hi there, This rings a bell in my mind. I believe I found similar things to Nil. I had an auto-loaded module, that created a dialog box to set the file name of an IGTToolStorage file, and the port name of the COM port to connect to, for an NDI Tracker. I wanted to persist the settings, so that the user didn't have to keep repeatedly setting the filename and port, which in all likelihood remain fairly constant for each users setup. I could not get the PersistenceService to work, and it performed differently on Linux/Mac to Windows. Im basically using MITK 2015.05.2. In the attached file you will see I ended up commenting it out, and resorting to QSettings. So, I would be interested in the outcome of this. Any ideas what is going on? Is it something to do with the fact that its an auto-loaded module, and the order of auto-loading? Thanks Matt ------------------------------------------------------------------------------ _______________________________________________ mitk-users mailing list mitk-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mitk-users
