Just checking if anyone would be able to assist with installation issues on RedHat. Thanks
Paul Palei Information Technology Specialist Massachusetts Institute of Technology Research Laboratory of Electronics 77 Massachusetts Ave, Cambridge, MA 02139 36-427B (617) 324-2197 | Direct ppa...@mit.edu -----Original Message----- From: Paul Palei [mailto:ppa...@mit.edu] Sent: Friday, August 5, 2016 10:36 To: Heim, Eric <e.h...@dkfz-heidelberg.de>; Kislinskiy, Stefan <s.kislins...@dkfz-heidelberg.de>; mitk-users@lists.sourceforge.net Subject: Re: [mitk-users] MITK Workbench- installation advise Hi Eric, Thank you so much for your advice. This got me further than I was before but still can't install it completely so that it can be used. It now generates lots of error messages and fails at the end. I am attaching those errors here if someone is brave enough to take a look at try to figure out what they mean. Thank you for all you help. Paul Palei Information Technology Specialist Massachusetts Institute of Technology Research Laboratory of Electronics 77 Massachusetts Ave, Cambridge, MA 02139 36-427B (617) 324-2197 | Direct ppa...@mit.edu -----Original Message----- From: Heim, Eric [mailto:e.h...@dkfz-heidelberg.de] Sent: Tuesday, August 2, 2016 11:16 To: Paul Palei <ppa...@mit.edu>; Kislinskiy, Stefan <s.kislins...@dkfz-heidelberg.de>; mitk-users@lists.sourceforge.net Subject: AW: MITK Workbench- installation advise Hi Paul, This is what solves the "xcb" error for me: MitkWorkbench.sh: #!/bin/sh export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/Qt5.4.0/5.4/gcc_64/lib export QT_QPA_PLATFORM_PLUGIN_PATH=/opt/Qt5.4.0/5.4/gcc_64/plugins binpath=$(dirname "$(readlink -f "$0")") appname=$(basename "$0" .sh) export LD_LIBRARY_PATH="$binpath/bin":"$binpath/bin/plugins":$LD_LIBRARY_PATH "$binpath/bin/$appname" $* Cheers, Eric -----Ursprüngliche Nachricht----- Von: Paul Palei [mailto:ppa...@mit.edu] Gesendet: Dienstag, 2. August 2016 16:42 An: Kislinskiy, Stefan; mitk-users@lists.sourceforge.net Betreff: Re: [mitk-users] MITK Workbench- installation advise When I do search for libQt5Core.so.5 it finds it in other than what you specified location. I tried exporting this path as well but it gives me the " could not find or load the Qt platform plugin "xcb"" error. Not sure on this. Paul Palei Information Technology Specialist Massachusetts Institute of Technology Research Laboratory of Electronics 77 Massachusetts Ave, Cambridge, MA 02139 36-427B (617) 324-2197 | Direct ppa...@mit.edu -----Original Message----- From: Kislinskiy, Stefan [mailto:s.kislins...@dkfz-heidelberg.de] Sent: Tuesday, August 2, 2016 10:28 To: Paul Palei <ppa...@mit.edu>; mitk-users@lists.sourceforge.net Subject: RE: MITK Workbench- installation advise Hi Paul, that probably means that you didn't correctly specify the QT_PLUGIN_PATH variable in MitkWorkbench.sh. See my last mail and double check the according line (and its position) in case you had already added it to your MitkWorkbench.sh. Best regards, Stefan -----Original Message----- From: Paul Palei [mailto:ppa...@mit.edu] Sent: Dienstag, 2. August 2016 16:16 To: Kislinskiy, Stefan; mitk-users@lists.sourceforge.net Subject: RE: MITK Workbench- installation advise Hi Stefan, Thank you for reply back and your suggestion. I tried what you advised but it gives me new error now. See attached. Any idea? Let me know if other system logs are needed. I am trying to install on RedHat 7.2 Any help is appreciated. Paul Palei Information Technology Specialist Massachusetts Institute of Technology Research Laboratory of Electronics 77 Massachusetts Ave, Cambridge, MA 02139 36-427B (617) 324-2197 | Direct ppa...@mit.edu -----Original Message----- From: Kislinskiy, Stefan [mailto:s.kislins...@dkfz-heidelberg.de] Sent: Friday, July 29, 2016 05:16 To: Paul Palei <ppa...@mit.edu>; mitk-users@lists.sourceforge.net Subject: AW: MITK Workbench- installation advise Hi Paul, does it help to add "/opt/Qt/5.4/gcc_64/lib" to the LD_LIBRARY_PATH line in MitkWorkbench.sh and to add an extra line like "export QT_PLUGIN_PATH=/opt/Qt/5.4/gcc_64/plugins" before the last line? Best, Stefan ________________________________________ Von: Paul Palei [ppa...@mit.edu] Gesendet: Dienstag, 26. Juli 2016 18:31 An: mitk-users@lists.sourceforge.net Betreff: [mitk-users] MITK Workbench- installation advise Hello all, I am having trouble installing it on RedHat Linux. It complains about qt .so file. See attached image with the error. I looked up in your Wiki but was not able to find an answer to this trouple. I also looked at the downloads page and saw instructions about QT_PLUGIN_PATH but this has not solved my install issue. I have QT 5.4.2 installed in /opt/ and I can see that libqt5core.so.5 is there and have set the path to it but then I am just getting another error. Systems are RedHat 7.2 and 6.5, all give the same error. Any help is appreciated. Paul Palei Information Technology Specialist Massachusetts Institute of Technology Research Laboratory of Electronics 77 Massachusetts Ave, Cambridge, MA 02139 36-427B (617) 324-2197 | Direct ppa...@mit.edu<mailto:ppa...@mit.edu> [cid:image001.gif@01D1E739.B4F67D60] ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ mitk-users mailing list mitk-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mitk-users
