Hello,

I am attaching a patch that adds four new configuration variables to the
Stanton SCS3d.

StantonSCS3d.pitchFineSwap = false;      // Pitch sensitivity is fine
permanently

I use SCS for "basic" mixing (house, dnb etc) and I found its sensitivity
way too hard. I like the fine pitch option but I found I am using it
permanently. With this parameter set to true its always set (but still you
can use the deck button to temporary disable it).

StantonSCS3d.finePitchSensitivity = 1;  // Fine pitch sensitivity (1 =
normal, 2 = finer, 3 = ultra fine, 4 = mega fine)

If you need even more fine pitch sensitivity you can set 2 or more in this
option. The higher the number is the finer the sensitivity is. Usable values
are 1-5.

StantonSCS3d.disableS4InVinyl1 = false;  // Disable S4 (center slider) in
Vinyl (aka Vinyl1 - red) mode
StantonSCS3d.disableS4InVinyl2 = false; // Disable S4 (center slider) in
Vinyl2 (aka Vinyl2 - purple) mode

While in the Vinyl1 mode (red Vinyl button) I sometimes mis-touch the S4
plate. Results are quite bad - mix is ruined. With these booleans one can
disable S4 in boh Vinyl1 and Vinyl2 modes.

All default values does not change anything. By accepting my patch you are
only expanding the configurability. I can update the wikipage as well.

http://www.mixxx.org/wiki/doku.php/stanton_scs.3d_mixxx_user_guide

The patch:
http://lzap.fedorapeople.org/temp/patches/0000-Fine-pitch-plus-S4-disable.patch

LZ

--
View this message in context: 
http://mixxx-devel-list.2283481.n4.nabble.com/Patch-Stanton-SCS-3d-JS-tp3339893p3339893.html
Sent from the Mixxx Devel List mailing list archive at Nabble.com.

------------------------------------------------------------------------------
What You Don't Know About Data Connectivity CAN Hurt You
This paper provides an overview of data connectivity, details
its effect on application quality, and explores various alternative
solutions. http://p.sf.net/sfu/progress-d2d
_______________________________________________
Mixxx-devel mailing list
Mixxx-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mixxx-devel

Reply via email to