Hi,
a few days ago, I just downloaded the cvs-relaese of driver-zoran.
I was surprised beacause a lot improvement was done ;-))! congratulations to the
developers.
With my dc19old on my P200MMX, I used lavrec successfully.
But If I try to play the frame with lavplay, here comes the problem.
Software playback is ok :
# lavrec -p S -a 0 knot.avi
It is slow, but it works.
Hardware playback does not work .
# lavplay -n 128 -p C -a 0 knot.avi
lavplay1.6.1
lavtools version 1.6.1
next I wait for about 30 seconds, and then I can see the top left of the screen
altered by something like an image (see attached) . Next nothing more, and finaly,
after some time,
**ERROR: [lavplay] Error syncing on a buffer: Timer expired
#dmesg :
DC10(old)[0]: zoran_open(lavplay, pid=[19742]), users(-)=0
DC10(old)[0]: dc10_init()
DC10(old)[0]: jpeg_codec_sleep() - sleep GPIO=0x21008888
DC10(old)[0]: jpeg_codec_sleep() - wake GPIO=0x25008888
DC10(old)[0]: jpeg_codec_sleep() - wake GPIO=0x2d008888
DC10(old)[0]: jpeg_codec_sleep() - sleep GPIO=0x2b008888
DC10(old)[0]: enable_jpg(IDLE)
DC10(old)[0]: BUZIOC_REQBUFS - count=128, size=143360
DC10(old)[0]: mmap(MJPEG) of 0x4042c000-0x4088c000 (size=4587520)
DC10(old)[0]: BUZIOC_G_PARAMS
DC10(old)[0]: VIDIOCGCAP
DC10(old)[0]: BUZIOC_S_PARAMS
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=0
DC10(old)[0]: jpeg_codec_sleep() - wake GPIO=0x27008888
DC10(old)[0]: enable_jpg(MOTION_DECOMPRESS)
DC10(old)[0]: jpeg_start
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=1
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=2
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=3
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=4
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=5
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=6
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=7
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=8
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=9
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=10
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=11
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=12
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=13
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=14
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=15
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=16
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=17
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=18
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=19
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=20
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=21
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=22
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=23
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=24
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=25
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=26
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=27
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=28
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=29
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=30
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=31
DC10(old)[0]: BUZIOC_SYNC
DC10(old)[0]: jpg_sync() - timeout: codec isr=0x0b
DC10(old)[0]: BUZIOC_QBUF_PLAY - frame=-1
DC10(old)[0]: jpeg_codec_sleep() - wake GPIO=0x2f008888
DC10(old)[0]: jpeg_codec_sleep() - sleep GPIO=0x2b008888
DC10(old)[0]: enable_jpg(IDLE)
DC10(old)[0]: munmap(MJPEG)
DC10(old)[0]: zoran_close(lavplay, pid=[19742]), users(+)=1
DC10(old)[0]: jpeg_codec_sleep() - wake GPIO=0x2f008888
DC10(old)[0]: jpeg_codec_sleep() - sleep GPIO=0x2b008888
DC10(old)[0]: enable_jpg(IDLE)
DC10(old)[0]: interrupts received: queue_state=0/0/2/32: no interrupts detected
------------------------------------------------
Sometimes it don't have to wait anything, and I get this answer :
#lavplay -n 128 -p H -a 0 knot.avi
**ERROR: [lavplay] Could not set on-screen window parameters (check framebuffer-params
with v4l-conf): Invalid argument
If any has an idea, how to manage the buffer, frame-buffer... Any comment are welcome !
Ciao
Alexandre
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Mjpeg-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
