Here is the problem: I have an Iomega BUZ card, which has worked fine forever in one of my Win boxes. I have put together a new box, a Via EPIA-M 1000 board, 512mb ram, running RH 9. The kernel is 2.4.20.
Following the instructions as best as I know, I applied the video4linux2 patch, and proceded with the MAKE command.
After a good deal of stuff which have left out, the trouble begins, and the MAKE dies:
zoran_driver.c: In function `zoran_mmap':
zoran_driver.c:4619: warning: passing arg 1 of `remap_page_range_R2baf18f2' makes pointer from integer without a cast
zoran_driver.c:4619: incompatible type for argument 4 of `remap_page_range_R2baf18f2'
zoran_driver.c:4619: too few arguments to function `remap_page_range_R2baf18f2'
zoran_driver.c:4704: warning: passing arg 1 of `remap_page_range_R2baf18f2' makes pointer from integer without a cast
zoran_driver.c:4704: incompatible type for argument 4 of `remap_page_range_R2baf18f2'
zoran_driver.c:4704: too few arguments to function `remap_page_range_R2baf18f2'
make[2]: *** [zoran_driver.o] Error 1
make[2]: Leaving directory `/home/kittycat/downloads/driver-zoran-0.9.4'
make[1]: *** [_mod_/home/kittycat/downloads/driver-zoran-0.9.4] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.20-8'
make: *** [here] Error 2
I am not sure where to go from here, I've verified I have applied the required patch (tried to reapply it and the system indicated it was already applied before). I did read the FAQ for the Unified Zoran Driver, but the FAQ seemed to only apply once one had the driver compiled and installed.
Any suggestions? Did I miss something obvious? Any help is appreciated, thank you.
------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
