Hallo > i am trying to capture from a v4l device (bt878 based card), but > the -i option seems to fail: if i set it to -i p, for > PAL through Composite, it actually records the TV-tuner, and indeed > v4lctl list confirms this. if i use v4lctl to set it to composite > by hand (v4lctl setinput Composite1), and leave out the -i option for > lavrec, it _does_ works... Have you already taken a look at the manpage of lavrec ? You find here that: p - PAL through Composite or 1st Bt8x8 input P - PAL through SVHS- or 2nd Bt8x8 input t - PAL through TV-tuner- or 3rd Bt8x8 input .....
The recording source selection is different for the zoran devices and bttv devices. So the option don't match, lavrec was written for zoran devices and the bttv support was added afterwards. If you don't use a option lavrec autosenses the input and uses the first active input. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
