Aren't the factory ends made by Beru? On Sun, 16 Jan 2000 14:27:50 -0800 "New Dimensions" <[email protected]> writes: >Hi guys. > >There are many good plug wires on the market. The thing to look >for is factory moulded ends with the proper matching resistance >value. Our ND wire set is used on the worlds fastest H20 VW. Bill >Esserini's turbo VR6 dragster. This gives you an idea of how good >the factory ends and good 8mm silicone wire is. > >Things to stay away from on wire sets are crimpped style terminals >and use of other than OEM ends. I am sure there are wires sets >with some of these features that may work fine also but I would use >it as a general rule. > >These types are what I see fail more often in the shop. Also use a >little dielectric grease when installing the ends on the dist. cap. > > > >[email protected] >http://www.newdimensions.com >_____________ >List Sponsor: http://www.netsville.com >To remove yourself from this list, send mail to >[email protected] with 'unsubscribe a2_16v' in the body of your >message >See us on the web at http://www.a2-16v.com >Visit the 16V Homepage at http://www.gti16v.org
________________________________________________________________ YOU'RE PAYING TOO MUCH FOR THE INTERNET! Juno now offers FREE Internet Access! Try it today - there's no risk! For your FREE software, visit: http://dl.www.juno.com/get/tagj. _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
