Just went through the same thing, here it is: 2.0l main bearing journal diameter:
basic: 53.978-54.042mm 1st undersize (.25mm): 53.728-53.795mm 2nd undersize (.50mm): 53.478-53.542mm 3rd undersize (.75mm): 53.228-53.292mm HTH, Denis Doug Curtis wrote: > > Could someone look up what the Main Journal Tolerances are for a 2.0L > 16V crank. I need to have a regrind done, and would like to know the > Std, 1st oversize, 2nd oversize, and 3rd oversize #'s before talking to > a machine shop. > > Thanks > _____________ > List Sponsor: http://www.netsville.com > To remove yourself from this list, send mail to [email protected] with > 'unsubscribe a2_16v' in the body of your message > See us on the web at http://www.a2-16v.com > Visit the 16V Homepage at http://www.gti16v.org _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
