Underneath for the most part. If you do the complete rebuild, you'll be pulling the shifter rod out through the car. Most of the bushings are centered right around the trans itself. It's really not that difficult, just a little time consuming and really messy. Personally, I would say if you have a jack, two 13mm wrenches, 13mm and 15mm sockets and an extension, go for it. Just note where each bushing (or its remains) is placed as you disassemble the linkage and you'll be fine.
Cheers, Pat Steve Ingels wrote: > Can this be done from inside the car or do I have to get at it from > underneath? > > Steve > www.quickvws.com > > ----- Original Message ----- > From: "Gabriel Varner" <[email protected]> > To: <[email protected]> > Sent: Friday, June 08, 2001 11:20 AM > Subject: Shifter bushing rebuild kit : how much 2 install? > > > Hey , I just got my bushing complete rebuild kit in the mail from > adriondak > > , and i was just wondering how much do you guys think labor will be , to > > install all of them. thanks > > > > Gabriel > > 89 GTi 16v > > _________________________________________________________________ _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
