If you really want to protect your seats there is a few ways of doing it. I didn't realize how easy it is to take the seats out of our cars untill I had to put replacement seats in my 91 Jetta. All it takes is to remove the acorn nut in the front of the middle track. After you do that slide the seat all the way back and its off. It takes about 30 seconds to get the seat out.
1. Replace the acorn nut on the middle track (dip your head under the seat and look for the nun on the front of the middle track) with a small MASTER or another brand lock. If you want to fit a bigger lock you can always make the hole in the track bigger by drilling it out. 2. Actually drill a hole into the side track (from the back seat) and put a big Master lock through the track. 3. Weld a plate with a hoop to the floor under the seat and cut a hole through the carpet so the hoop will sitck out. Weld two 3/8" or 1/2" thick chains to the under frame of the seat (one chain on each side). Leave enough slack in the chain so that you can slide the seat around, but enough so that it can't slide off the tracks. Lock both chains to the hoop with a big ass master lock. Your seats aren't going anywhere. Guys who break into our cars aren't going to have an array of tools or be repared to handle a lock. Thats how you keep your Recaro Seats. Mark Reda. _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
