Thanks Matthew - I'll save the few bucks and reuse the gaskets. I originally replaced them because the spark plug holes were filling up with oil - that problem's solved.
-Ken -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Matthew Yip Sent: Wednesday, August 29, 2001 8:02 AM To: [email protected] Subject: Re: Valve cover gasket reusable? Since the gaskets are rubber, reusing them probably isn't too much of an issue - if the leaks continue, you may want to replace the gasket however. --- Ken Mental <[email protected]> wrote: > > I replaced the rubber valve cover gasket a few weeks ago on my 16v, > but didn't replace the half-moon end plugs. Well, one of them is > leaking some oil, so I need to remove the valve cover again and > replace them. Can I reuse the gaskets, or should I go ahead and buy > another set? ===== Matthew __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
