> > ok, I have one small interogation, goring from a GTI 8v engine to a 1.8L 16v > > engine. Since both engines use the CIS-E, could I just swap the knock > > sensor module, ecu, ignition module and the fuel injector lines? > > yes. you might have some trouble with the length of the injector > lines...i'm not sure...we had the 16v lines available. all the other > components (like the ISV and sensors) from the 8v work on the 16v, just > in different locations. > > you'll need 16v plug wires, dist, ISV pipes, etc., but you probably have > all of that. > > you can use the old computers, but you can pick new 16v ones up for > under (usually well under) $50 for all of them, so you might as well get > 16v ones. theyre not worth much, so dont let anyone screw you over. >
The guy gave me the knock sensor module, ignition module and engine control module. I would like to check with the part numbers to make sure that they are for sure 16v. Does any people have info about vw part number on those three module, or a website where I could find all that info. math b _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
